ANKER PowerExtend USB-C 3 Cube User Manual
- June 6, 2024
- Anker
Table of Contents
ANKER PowerExtend USB-C 3 Cube User Manual
What’s in the Box
Overview
- A. Power indicator
- B. USB-A output
- C. USB-C output
- D. AC outlet
Using Your PowerExtend
Using the Adhesive Strip
If necessary, you can use the adhesive strip to affix PowerExtend USB-C 3 Cube onto a surface.
Specifications
| AC Input | 125VAC 60Hz 10A |
|---|---|
| USB Input | 100-240V 50/60Hz |
| AC Output | 125VAC 60Hz 10A 1250W |
| USB-A Output | 5V =2.4A (2.4A Max Each Port) |
| USB-C Output | 5V=3A/9V=3A/15A=2A/ |
20V =1.5A
USB Output Total| 30W
Size| 62 x 62x 62mm/2.4 x2.4 x2.4 in
Cable Length| 5 ft /1.5 m
Safety
- Do not connect PowerExtend USB-C 3 Cube to an ungrounded outlet.
- Do not use with extension cords.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Keep PowerExtend USB-C 3 Cube away from heat-emitting appliances such as radiators.
- Keep children away from PowerExtend USB-C 3 Cube
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio / TV technician for help
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone:1-800-988-7973
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the device.
Customer Service
18-month limited warranty
Lifetime technical support
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mon-Fri 6:00 – 11:00
+86 400 0550 036 9:00 – 17:30
03 4455 7823 – 9:00 – 17:00
For FAQs and more information, please visit:
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP
@anker_official
@anker_jp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>