CDN GP-100 Thermographic Thermometer User Guide

Thermographic
Thermometer
Model: GP-100
Manual 1.0

 Product Composition

System Settings

Temperature Alarm Point Setting

Short press three times and then long-press the “ ” key to enter the setting mode, the screen display, can be modified by the “+/-” key, each time you press the “+” key temperature alarm value increases by 0.1, press the “-” key temperature alarm value Decrease by 0.1 (default alarm threshold is 37.4℃). After setting, press the” ” key to exit the setting.

Temperature Offset Setting

Short press three times and then long press “ ” key to enter the setting mode, press “ ” key to display on the screen, and can be modified by “+/-” key, the offset threshold increases by 0.1 every time you press “+” key, press “-” The key offset threshold is reduced by 0.1 (the default offset threshold is 0﹚). After setting, press the” “key to exit the setting.

Software Version Number Query

Short press three times and then long-press the “C°/F ” key to enter the setting mode, press the “C°/F ” key twice displays , on the screen, representing the current software version number is 1.1.0. After the query is completed, press the” “key to exit the setting.

Time Setting

Short press three times and then long-press the ” C°/F” key to enter the setting mode, press the ” C°/F” key three times to enter the time setting mode, the default time is January 1, 2020, 1:01, press “C°/F ” to switch year/month/day / Hour/minute setting, press “+” to increase, “-” key to decrease, after setting, press ” ” key to exit setting.

How to use

This product is equipped with 3M adhesive as standard. Paste the device on the channel is about 1.4 meters from the ground. The sticking surface is preferably wood. Connect the Type-C power supply cable to the charging hole on the back. Connect the DC 5V power supply. The short press “ ” key device is turned on, and the temperature is measured at a wide angle of 60° to meet the temperature measurement of people of different heights. In the power-on state, press and hold the “ ” key for 3 seconds to power off.

After fixing the device (users can also purchase a fixing bracket adapted to the British 1/4 nut, which can be fixedly installed from the bottom of the back), the person is 0.3 ~ 1 meters away from the device (no need to stay), the screen automatically displays the measured value, The indicator light on the top of the device is green, and The speaker automatically broadcasts the prompt tone at the same time. If the measured value exceeds the temperature alarm point (the default alarm threshold is 37.4°C), the indicator light on the top of the device displays red, and the horn will automatically broadcast the alarm prompt tone at the same time.

Temperature Unit Setting

Short press the “C°/F ” key to switch between Celsius/Fahrenheit modes﹙ ﹚.The factory default is Celsius mode.

History Record Query

Short press the “-” key to query the temperature measurement record backward, short press the “+” key Query the temperature measurement record forward (you can query 30,0000 sets of temperature measurement records), press “C°/F ” in the query state to query the time of the temperature record (short press ” C°/F” to cycle through year-month-day-hour minute-temperature-year﹚, Short press ” ” key to exit the query mode.

Sound Settings

Press and hold the “+” button for 3 seconds to enter the voice language setting mode (default is Chinese/English, other languages can be customized), the screen display represents the current voice is Chinese and represents the current voice is English, press the “+/-” key to Switch languages. Press and hold the “-” key for 3 seconds to enter the volume setting mode. Short press the “+/-” key to increase or decrease the volume by 20% each time, the maximum volume is 100%, and the volume 0 is silent mode. After setting, press the” ” key to exit setting.

Introduction

It is suitable for many locations, such as school, public transportation, building channel, store, and shopping mall, residential apartment entrances, office building entrances, etc., High-precision thermal imaging sensor, no staying test temperature, automatic sound and light alarm for abnormal high temperature, avoid infection at close contact.

Technical Parameters

Accessories

Host 1, 2m Type-C power cable 1,
3M adhesive paper 2, Manual 1,
Qualified Certificate 1, Warranty card 1

Precautions

1. Do not use it in a temperature exceeding the working environment permitted by the device;
2. Avoid direct sunlight or strong reflected light to the temperature measuring probe, sunlight will affect the work of the device;
3. Do not place the device around high-intensity heat radiation sources;
4. Can not be measured through the glass, the reflection and transmission properties of glass will affect the work of the device;
5. Do not block the detection holes on the device;
6. Do not expose the device to dust or humidity, as it may damage the device and affect the measurement accuracy;
7. Please supply power to the device according to the rated power supply voltage;
8. Do not disassemble the device by yourself, as this may cause damage to the device and lose warranty rights.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>