CDN TRY1579 Air Quality Monitor Detects Carbon Dioxide (CO2) Instruction Manual
- June 6, 2024
- CDN
Table of Contents
CDN TRY1579 Air Quality Monitor Detects Carbon Dioxide (CO2)
Product Specifications
Display method: Common Screen display
Atmospheric pressure: 86Kpa – 106Kpa Detection method for
CO2 : Infrared (NDIR)
Sampling time: 1.5 seconds Product Size:708035mm Detection
temperature: -10°C to 50°C;
Relative humidity: 20% – 85% Storage
temperature: -10°C to 60°C; Concentration unit for CO2:PPM
Power source: Lithium battery with 1600mAh capacity; 5V DC power charging via
micro USB port Product
weight: 150g
Product Description
This product is an air quality monitor that detects Carbon dioxide (CO2), Temperature, and Humidity. it combines sensors real-time monitoring of Carbon dioxide (CO2), temperature, and humidity on its display.
Considerations
Please read the instructions carefully before using this device. Please let
the device work short mins outdoors before use for most accurate results .
Please keep the manual handy for quick reference and troubleshooting.
Precautions
Avoid covering the air intake areas during use to avoid inaccurate
measurements. Avoid use of solvents to clean the product as residual fumes
will skew air quality readings.
Avoid water or other liquids near the product to avoid electrical damage. Do
not allow unauthorized modification or repair of this product.
Features
- Common Screen display
- Test variables:Carbon dioxide (CO2),temperature, humidity
- Large 1600mAh capacity Lithium battery
- 5V Micro USB charging
- Low battery warning
Instructions
-
Start Up
Press power button to turn device on, and Long-press power button to turn device off. Single-click power button to recycle switch the brightness of screen. Double-click to Open/close alarm sound.
-
About Charging
When low battery icon is displayed, the device needs to be charged. Insert the included or another compatible micro USB charging cable into the device. Attach the other end to a USB DC charger (such as a smart phone charger) that outputs DC 5V at >=1000mA. Fully charge for at least 2-3 hours before use. Avoid charging with a USB computer port which only outputs 500mA. -
Parameters
CO2 technical indicators
Measuring range: 400-5000PPM
Resolution: 1 PPM
Sensor for CO2 : Infrared ( NDIR)
| CO2 range | Indicator light | Air quality |
|---|---|---|
| 400~1000 ppm | Green | Good |
| 1001~2000 ppm | Yellow | Normal |
| 2001~5000 ppm | Red | Poor |
Temperature and humidity technical indicators
Measuring range: -10-50 ° C Humidity range: 20%-85% RH
Product List
Air Quality monitor Micro USB charging cable Product Manual
Measurement accuracy: ±1 °C Measurement accuracy: ±4% RH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>