QUDO BT100 Fabric Bluetooth Speaker Instruction Manual

INSTRUCTION MANUAL
WIRELESS SPEAKER
Model: BT100

Product Specifications

Pack Contents

1. Wireless Speaker
2. Instruction Manual
3. Micro USB Charging Cable
4. Quick-start Guide

WARNING
Do not connect this cable to products other than BT100 true wireless earbuds. Connecting this cable to other devices might cause damage to both cable and the device.

Functions

1. Mode button

2. Volume down (Short press) / Previous track (Long press)

3. Volume up (Short press) / Next track (Long press)

4. Pause/Play/Hands-free (Short press)
   *When you receive a call, short press the button the answer.
   When the call ends, the music will resume playing.
   

5. 5. USB slot (for playing)

6. MicroSD card slot (for playing)

7. Micro USB charging port

8. ON/OFF switch

Charging the Speaker

Before using the speaker for the first time, charge it for at least two hours. Insert the included USB charging cable into the micro USB charging port. Connect the other end of the USB cable to a working USB power source.
Ensure the battery has been fully charged on the first three initial uses to ensure the battery’s best performance.
Upon completion of charging, please unplug the charging cable from the wireless speaker. Do not leave the wireless speaker charging after it’s fully charged. It may shorten the lifetime of the battery.

Powering the Speaker

1. Once fully charged, slide the ON/OFF switch to turn on the speaker.
2. BT100 is in pairing mode after power-on.
3. To manually turn off the speaker, slide the ON/OFF switch again.

Pairing the Speaker

Connect the speaker through Bluetooth:

1. Keep the speaker and device within 1 metre of each other.
2. Slide ON/OFF switch to turn on the speaker, the LED indicator will blink quickly, the speaker enters pairing mode.
3. Start the Bluetooth function on your mobile device and look for “BT100” in the Bluetooth device list (depending on the Bluetooth version of device may have to enter  password ‘0000’)
4. After successful pairing, a prompt “Bluetooth Connected” will be played.
5. The LED will be illuminated when music is playing.

Note:

• When you turn on the wireless speaker, it will automatically connect to the last connected device if it still in range.
• To pair a different device, you must turn off the wireless capability of the paired device or take it out of range.

Picking up Calls

1. Press the PLAY/PAUSE button to answer an incoming phone call.
2. Press the PLAY/PAUSE button to end the call.
3. Use the volume buttons to change the volume of the call.
4. Note: Some calls need to be answered on the device.

Playing Through MicroSD Card or USB

1. Insert USB to a USB slot or insert MicroSD card to MicroSD card slot, the speaker would play the music in USB or MicroSD card automatically, these two media types have priority over Bluetooth playback.
2. Switch play mode in between Bluetooth, USB and MicroSD by pressing the mode button. A prompt message will be played to confirm the success of switching each mode.
3. Speaker will play the media file from the attached USB storage and MicroSD card upon the power is turned on (If the storage device is attached).

Troubleshooting

No Sound:

• Power ON the speaker and charge the battery
• Increase the volume on your speaker and Bluetooth device
• Make sure you are using the correct paired device
• Move your Bluetooth device closer to the speaker and away from any interference or obstructions
• Use a different music source
• Check the play mode to select the attached media storage device
• Check on attached media storage for proper insertion
• Distorted sound:
• Decrease the volume on your speaker and Bluetooth device

Note: Hands-free conversation feature allows users to remotely accept a voice call from direct number dial in and certain instant messaging Apps by pressing the Play/Pause button on the speaker. Some instant messaging apps require users to confirm the acceptance of voice calls within the App only.

Safety and General Information

1.  Do not subject the device to liquid or attempt to disassemble the device.
2. Do not use this product in an aircraft.
3. Do not expose the device to direct sunlight, heat or flame.
4. Device may be warm while charging. It is normal.

Product Warranty – Valid for Australian Customers Only

Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as specified during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:

• to cosmetic damage;
• to damage caused by consumables used in connection with the product ;
• where the product has not been used in accordance with all provided instructions;
• to damage arising from fair wear and tear;
• where the product has not been subject to reasonable use;
•  where the product has been intentionally or negligently damaged; and/or
• if the customer has attempted to repair the product.

To make a claim under this warranty, please return your product with your receipt or proof of purchase to your nearest Officeworks store or contact 1300 633 423.

This warranty is provided in addition to any rights you may be entitled to under the Competition & Consumer Act 2010. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The Bluetooth® word mark and logos are registered trademarks owned by g Bluetooth SIG, Inc. and any use of such marks by Officeworks Ltd. is under license.

OFFICEWORKS LTD
236-262 EAST BOUNDARY ROAD EAST BENTLEIGH VIC 3165 AUSTRALIA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>