QUDO QDKIDSBEGN Kids Wireless Headphones User Guide
- June 12, 2024
- qudo
Table of Contents
QUDO QDKIDSBEGN Kids Wireless Headphones
Product Information
The QDKIDSBEGN/QDKIDSPKPE Quick-Start Kids Wireless Headphones are designed for children to enjoy wireless audio entertainment. These headphones feature Bluetooth connectivity, an LED status indicator, a line-in audio cable, a built-in microphone, a power button, a micro-USB charging port, and a rechargeable battery.
Product Usage Instructions
-
Power On/Off: To power on or off the
headphones, press and hold the power button for 3 seconds. -
Bluetooth Pairing: To pair the headphones with your device via Bluetooth, follow these steps:
-
In your device’s Bluetooth settings, activate Bluetooth.
-
Select “15LY28” from the available Bluetooth devices.
-
If prompted, enter the PIN “0000”.
-
The LED on the headphones will flash red and blue when ready to connect.
-
The blue LED light will be on and flash to indicate that the headphones are connected.
-
Charging: Before using the headphones for the first time, charge them for at least two hours by following these steps:
-
Plug the micro-USB cable into a computer’s USB port.
-
Alternatively, plug the micro-USB cable into a USB wall charger.
-
The charging process is indicated by a red light.
-
Once fully charged, the red light will turn off.
-
Low Battery Alert: When the battery voltage drops below 3.3V, the headphones will provide a warning, and a tone will be emitted from the speaker.
Power On/Off
Operation
In your device‘s Bluetooth settings activate Bluetooth and select ”15LY28” enter the PIN ‘0000’ if needed
Functions
Bluetooth Pairing
Charging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>