QUDO Octave 200 TWS Bluetooth Earphones with Charging Case Instruction Manual

June 6, 2024
qudo

QUDO - logo

WIRELESS EARBUDS
WITH WIRELESS CHARGING CASE
MODEL: OCTAVE 200

QUDO Octave 200 TWS Bluetooth Earphones with Charging
Case

INSTRUCTION MANUAL

IMPORTANT : Please read all instructions carefully before use and keep them for future reference Product overview

QUDO Octave 200 TWS Bluetooth Earphones with Charging Case - multi function
touch button

Pairing the earbuds

  1. Take out either earbud from the charging case, the earbud will automatically turn on and enter pairing mode (indicator light flashes red & green simultaneously).
  2. Turn on the Bluetooth function on a mobile device. Then select either Octave 200-L or Octave 200-R on the device available list. For mobile phones with iOS systems, please select “Accept” during the second prompt for the connection with “Headset”. For a mobile phone with an Android™ system, please select “Pair” during the second prompt for the connection with Octave 200-L or Octave 200-R (the other earbud name).
  3. Once pairing is successful, the indicator on the selected earbud will turn off. A prompt tune will confirm that the earbuds are connected. Bluetooth status on the mobile screen will also display “Connected” under the name “Octave 200-L” or “Octave 200-R”.
  4. Now both earbuds are registered so the mobile devices will be able to automatically switch between earbuds depending on user preference as a stereo pair or single side earbud.
  5. Earbuds are now ready to use.
  6. To improve the sound volume and especially sound quality, please install the correct size of earbuds adapters (included) that fits properly to your ear canal.
  • User is required to pair both Octave 200-L and Octave-R to enjoy the convenience of using either of the earbuds independently.

Charging operation

Initial use of the earbuds

  1. With the earbuds placed inside the charging case, connect the charging cable (included) to the charging port on the back of the charging case and the other end of the charging cable to a workable USB power source.
  2. Earbuds are fully charged once the power indicator light on each earbud turns off.

Recharging earbuds/charging case

  1. Recharge earbuds by inserting both earbuds into the charging case firmly. The indicators on earbuds will light up in red to confirm that charging starts.
  2. Red indicator light on the earbuds will be “on” during the charging process and will turn off once the earbud is fully charged. Charging time may vary based on the battery level of the charging case.
  3. Recharge the charging case by connecting the USB charging cable (included) to the charging port on the back of the charging case and the other end to a USB power source or using a wireless charge pad.
  4. Status lights at the front of charging case will flash green slowly during the charging process and will turn to solid green once the charging case is fully charged.
    Note: Recharging the charging case through wireless charging pad will generate heat on the bottom of the charging case due to energy conversion.

Functions

Function Operation Method
Pause/play Tap once on either one side of earbuds
Next track Tap twice on the right side earbud to skip to the next track
Previous track Tap twice on the left side earbud to skip back to the previous

track
Volume up| Long press on the right side of earbud and a beep tone will confirm the increase of volume
Volume down| Long press on the left side of earbud and a beep tone will confirm the decrease of volume
Virtual assistant| Tap three times on either earbud to call up assistant
Answer call| Tap once on either earbud to accept the call
---|---
Hang up call| Tap twice on either earbud to end the call
Turn off| Put both earbuds back into the charging case and the earbuds will turn off and start charging

Specifications

  • Model: Octave 200
  • Officeworks Product Code: QDSLTHW04
  • Bluetooth version: 5.0
  • Operating range: up to 10m
  • Battery capacity (earbuds): 40mAh per side
  •  Battery capacity (charging case): 250mAh
  • Listening time: up to 4 hours
  • Listening time with charging case: 12 hours
  •  Talk time: 5 hours
  • Standby time: up to 100 hours
  • Charging time:
    • 1 hour (earbuds)
    • 2.5 hours (charging case by cable)
    • 4 hours (charging case by wireless charging)
  • Power input: 5V 1A (USB cable) 5V 1A (wireless charging pad)

Troubleshooting

Issue Possible Cause Solution
Earbuds are not charging • Battery level in charge case is low

• Earbud charge points do not connect with charge points in charging case

| • Connect the charging case with the included USB charging
cable to a USB power source• Take out both earbuds and
reposition them in the charging case (Red indicator light should appear on the earbuds when charging is initiated)
Earbuds come loose when wearing| • Current earplug is not the correct size for comfort| • Swap the earplugs to a different come loose is not the correct size. Package includes small, when for comfort medium and large size earplugs
Audio conversation
could not be heard during handsfree operation| • Bluetooth connection is interrupted
• Audio volume level
was set to low| • Check the Bluetooth connection

• Check the sound volume setting on the mobile phone

Issue Possible Cause Solution

Earbuds cannot be
paired with the mobile
device| • The pairing steps were missed
• Previous connected devices have not yet disconnected from the earbuds
• Battery level is low in earbuds| • Turn off both earbuds by putting back into charging case and go
through the pairing steps agains
• Check the Bluetooth setting on the previous connected devicem to either turn off the Bluetooth function or remove “Octavew 200-L” or “Octave 200-R” from the list of device• Put both earbuds into the charging case to recharge ( check the battery level in the charging case and connect to external USB power source if necessary)
Audio from earbuds is
lagging or one side
dropped out| • Signal interference from surrounding environment such as cellular signal tower and WIFI broadcast antenna| • Leave the premises to reduce the interference
• Turn off both earbuds and remove “Octave 200-L” or ‘Octave
200-R” from the Bluetooth device list on your mobile device.
Re-initiate the pairing process
Charging case cannot be recharged| • A loose connection on USB charging cable in between
charging case and USB power source
• USB power source
is out of power| • Check both connections of the USB charging cable
• Check status of the USB power source

Resetting the earbuds

If steps above cannot resolve the issues, reset the earbuds with the following steps.

  1. Press and hold the multi-function touch button until all indicator lights turn off and then flash rapidly in green.
  2. Put both earbuds back into the charging case to reinitiate pairing (indicator lights will change from flashing green to solid red}.
  3. Remove Octave 200-L and Octave 200-R from the Bluetooth device list in your mobile device.
  4. Restart pairing of Octave 200 by following the pairing steps on page 1.

IOS is registered trademark of Cisco Systems, Inc. and its affiliates in the United States and certain other countries.
Android is a trademark of Google LLC.

Package contents

  • Wireless Earbuds x 1 pair
  •  Charge Case x 1
  • USB Charging Cable x 1
  • Earbud Adaptor x 3 pair (Size: S, M, L)
  • Instruction Manual x 1
  • Quick-start Guide x 1

Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer. If the product has any defects or does not work as specified during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product. This warranty does not apply:

  • to cosmetic damage;
  • to damage caused by consumables used in connection with the product (such as batteries);
  •  where the product has not been used in accordance with all provided instructions;
  • to damage arising from fair wear and tear;
  •  where the product has not been subject to reasonable use;
  •  where the product has been intentionally or negligently damaged; and/or
  • if the customer has attempted to repair the product. To make a claim under this warranty, please return your product with your receipt or proof of purchase to your nearest Officeworks store or contact 1300 633 423.

This warranty is provided in addition to any rights you may be entitled to under the Competition & Consumer Act 2010. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

QUDO Octave 200 TWS Bluetooth Earphones with Charging Case -
Bluetooth

The Bluetooth® word mark and loqos are registered trademarks owned by Buetooth SIG, Inc. and any use of such marks by Officeworks Ltd. is under license.
OFFICEWORKS LTD 236-262 EAST BOUNDARY ROAD EAST BENTLEIGH VIC 3165 AUSTRALIA MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals