MiBOXER WL-433 433MHz Gateway User Guide

MiBOXER WL-433 433MHz Gateway

Please read the instructions carefully before using the controller.

Features

Use LoRa SPSP Modem technology, compatible with MiBoxer 433MHz series products; and controlled by MiBoxer APP through WiFi or 4G network. Support DMX512(1990) control. Support third party voice control.

Parameters

Model No.: WL-433
Input: DC5V/500mA ( 5.5*2.1mm )
Working Temperature: -20~60℃
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz Input Signal: DMX512(1990)
RF: 433MHz ( Transmitting Power: 15dBm ) Modulation Method: LoRa spread spectrum
Control Distance: 50m (Lamps into 0.5m under freshwater) Control Distance: 1000m (Lamps on the open area) Product Weight: 95g

Installation

Please install the device within 50m as lights, and approaching the WiFi Router.

User Instruction

1. Install MiBoxer APP. Click“ + ” add devices( See details on MiBoxer APP instructions).
2. Click “433 Gateway” on the device list to enter control interface.
3. Click “Link/Unlink”. Link/Unlink method, See details on APP link/unlink instruction.
4. After linking successfully, back to the control interface to control the lights randomly.
   Note: This gateway cannot group control.

Learning function
Gateway copy the remote ID to fulfill the gateway and remote ID no difference; after linking with remote, the gateway can control the lamps directly without linking again.

1. click “Learn” button, device indicating lamp blinking.
2. within 10 seconds, click any button on the remote,
   APP will hint learning successfully.
   Note: Just FUT086 433MHz remote support learning currently.

Restore gateway ID
Short press gateway “SET” five times; restore successfully after devices indicating lamp blink 3 times.

Zone selection
Click the “Zone” on the left bottom into the Zone selection. Note: Please select the linked Zone, otherwise it cannot control the lamps.

Setting DMX512 address
Click “Set DMX” on the top right corner; Set DMX512 address for gateway on the pop-up window.

MiBoxer APP User Instruction

APP Downloading

For IOS System: Pls search “MiBoxer” on APP store. (Above IOS9.0)
For Android System: search “MiBoxer” on Google Play (Above Android 5.0) or Scan below QR-code to download APP.

Register MiBoxer Account

Open APP and click Register button;Complete the register and log in.

Add Device

1. Click the right top “+” on the device list.
2. Please select the device type you will add, then complete the adding according to the hint of APP.
3. Back to device list after adding successfully, then pull down refresh in list to get the device status.

Modify device name or delete device
Slide device list to left, click ” Edit ” to modify device name; click ” Delete ” to delete device.
Note: If the device was shared to others, then the device will also be deleted on your friends’ device list.

APP Control

Click the device or group that you want to dim on device list and group list into Dimming Interface.

Click speed+ under dynamic mode.
Click speed- under dynamic mode.

Third Party Voice Control instructions

Search “Mi-Light Smart” on third-party platform APP and set up.
Click left top ” ” icon on the home page;
Then click ” ” to check detailed instructions.

Sharing Device
Share the device to friends, Let your friends can control this device.

1. Click the left top ” ” icon on the home page.

2. Click ” ” to My sharing, then click”Add sharing”
   (Note: the receiving sharing device cannot be shared again).

3. Click ” ” to edit sharing, slide to left to delete sharing.

Scan QR code to watch online video or WiFi pairing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>