MiBOXER RGB+CCT Wall-mounted Underwater Light Instruction Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER RGB+CCT Wall-mounted Underwater Light
Model No.: UW01 / UW02
Product Features
This wall-mounted underwater lamp is designed and developed for underwater lighting; It’s with RF module inside. We use LoRa modem technology to fulfill the super long distance controlling. It’s controlled by our 433MHz remote control or 433MHz Gateway for smartphone control. The lamp is with Red,Green,blue,cool white and warm white LED chips in side to fulfill the color changing,brightness dimming and dynamic mode controlling. Easy operation.
RGB+CCT
16 millions of colors to choose
Color temperature
2700K~6500K
Dim brightness/
Saturation
Waterproof and dustproof
grade IP68
433MHz RF wireless
transmission technology
Super long distance 433MHz
remote controller control
Smartphone APP control
(433MHz Gateway is needed)
Support third party voice control
(433MHz Gateway is needed)
Dynamic Mode Sheet
| Number | Dynamic Mode | Brightness & Speed |
|---|---|---|
| 1 | Mardi Gras | Adjustable |
| 2 | Automatic color change | |
| 3 | Sam | |
| 4 | Gemstone | |
| 5 | Twilight | |
| 6 | American | |
| 7 | Fat Tuesday | |
| 8 | Party | |
| 9 | Slow Color Splash |
Parameters
15W RGB+CCT Wall-mounted Underwater Light (LoRa 433MHz)
Model No.: UW01
Input Voltage: AC12V / DC12V~24V
Power: 15W
Working Temperature: – 20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 1100LM
Light Efficiency: 72LM/W
CRI: >80
Lifespan: 50000h
IP Rate: IP68
Beam AngIe: 160°
RF: 433MHz (LoRa spread spectrum)
Control Distance: 50m (Lamps into 0.5m under freshwater)
Product Weight: 750g
Housing Material: Stainless Steel+PC
27W RGB+CCT Wall-mounted Underwater Light (LoRa 433MHz)
Model No.: UW02
Input Voltage: AC12V / DC12V~24V
Power: 27W
Working Temperature: -20~45°C
Color Temperature: 2700K~6500K
Luminous Flux: 2000LM
Light Efficiency: 75LM/W
CRI: >80
Lifespan: 50000h
IP Rate: IP68
Beam AngIe: 160°
RF: 433MHz (LoRa spread spectrum)
Control Distance: 50m (Lamps into 0.5m under freshwater)
Product Weight: 1225g
Housing Material: Stainless Steel+PC
Connection Diagram
1Input: AC12V / DC12V~24V
Link/Unlink
Compatible with “FUT086 remote controller” and “WL-433 433MHz gateway”
(Purchased separately)
CAUTION: Lighting can be working after linking with remote; for more
details, pls read the remote instruction.
Switch-OFF to change color instruction
Switch OFF(for 5 seconds); Switch-ON again
| Switch-OFF
(For 5-10 seconds); Switch ON again
| Switch-OFF
( for over 10 seconds); Switch ON again
---|---|---
Switch the colors and dynamic modes in turn| |
1. Static Red 9. Mardi Gras
2. Static Green 10. Automatic color change
3. Static Blue 11. Sam
4. Static Yellow 12. Gemstone
5. Static Cyan 13. Twilight
6. Static Purple 14. American
7. Static Cool White 15. Fat Tuesday
8. Static Warm White 16. Party
17. Slow Color Splash
|
Static Red
|
Status before Switch OFF
Attention
- Please check whether the input voltage supply is in accordance with the lighting fixtures, and please check the connection of both the cathode and anode.
- The working voltage is DC24V, the lighting will be damage if the voltage is higher than DC24V.
- Non-professional user cannot dismantle the lighting directly, otherwise it may damage the lighting.
- The working temperature is -20~45°C.
- Please do not use lighting around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
- Users must be correct, strict and solid to install the light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>