Starfrit 92721 High Precision Pocket Scale Instructions
- June 6, 2024
- Starfrit
Table of Contents
High precision scale
INSTRUCTIONS
INSTRUCTIONS FOR USE AND CARE (Read the instructions before use)
FEATURES / SPECIFICATIONS
- High precision strain gauge sensor
- Piece counting mode
- Blue LCD backlight for easy reading
- Zero and tare functions
- Low batteries and overload indicators
- Auto zero and auto off
BATTERIES
Requires 2 x AAA batteries (included)
TO REPLACE BATTERIES
| 1. Open the battery compartment located on the bottom of the scale.
2. Take out the used batteries (with the aid of a sharp object if needed)
3. Install new batteries in the compartment, making sure to observe the
polarity.
---|---
LCD
CAPACITY AND ACCURACY
| Capacity | 100 g / 3.5 oz |
|---|---|
| Accuracy | 0.01 g / 0.0005 oz |
TO OPERATE
| 1. Place the scale on a solid, flat surface. Avoid carpet or other soft
surfaces.
2. Press and release ON/OFF button to switch on the unit.
3. Wait until display prompts to 0.00 before starting weighing.
4. Always place the object to weight in the center of the platform.
---|---
TO CHANGE THE UNIT OF WEIGHT MEASUREMENT
You can press UNIT button to toggle the weight measure between gram, ounce, dwt, ozt and to pre-set piece counting mode.
PIECE COUNTING MODE
| 1. Press UNIT to select piece counting mode ‘PCS’ when the scale is vacant.
The scale is programmed with 3 different pre-set quantities: 25 pcs, 50 pcs
and 100 pcs.
2. Press UNIT for 3 seconds to select the desired pre-set quantity value (25,
50 or 100). Rapidly pressing UNIT will cycle through the pre-sets. Once a pre-
set quantity is selected (for example 50), place this same quantity (50 pcs)
on the weighing platform, and wait for LCD to flash ’50’.
The scale now recognizes this weight as the weight of 50 pcs, and also
calculates and stores in memory the average single unit weight value. Next
time weighing a different quantity of this
3. same object, simply turn on the scale and place X quantity of the object
onto the weighing platform. LCD will start by showing the weight as usual.
Press ‘UNIT’ to switch to piece counting mode ‘PCS’ and the LCD will display
the quantity placed on the platform .
---|---
Remark: Repeat the above steps when conducting piece count calculations for different objects. For calibration accuracy, pre-set quantity of 100 pcs is suggested. An object with a unit weight of less than 1 scale division will not be calibrated.
“ZERO” OR “TARE” FUNCTION
To weigh different loads consecutively without removing loads from the scale,
put the first load on the scale to obtain a weight reading. Press Z/T button
to reset the LCD reading to “0.00” before adding next load. You can repeat
this operation.
By pressing Z/T, you can see the total weight of all loads on the scale. If
you want to weigh more loads, just press Z/T to reset LCD reading to “0.00”
again.
| LCD BACKLIGHT
1. LCD backlight will be activated when you switch on the scale. Backlight
will automatically shut off after idling for 30 seconds.
2. Backlight will light up again whenever scale is re-activated
---|---
| AUTO SHUT OFF
Auto shut-off occurs if display shows ‘0’ or shows the same weight reading
for 2 minutes.
| MANUAL SHUT OFF
To maximize battery life, always press ON/OFF to turn off the scale after
use.
| WARNING INDICATORS
1. Indicates Low battery power. Replace new battery.
2. Indicates scale over load. Remove the object to avoid damage. Maximum
weight capacity of the scale is 0.5kg.
TO OPEN THE COVER
CLEANING AND CARE
- Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical/abrasive cleaning agents.
- The scale is high precision device. It is delicated built and extremely sensitive. Please avoid dropping the unit or subject the unit to violent impact which will damage it.
SUBSCRIBE TO THE NEWSLETTER TO LEARN MORE ABOUT OUR PROMOTIONS!
WWW.starfrit.COM
www.facebook.com/starfrit
PRINTED IN CHINA FOR : ATLANTIC PROMOTIONS INC. LONGUEUIL (QUÉBEC) J4G 1V6
CUSTOMER SERVICE: STARFRIT.COM/EN/CONTACT-US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>