eeLink TK119 Glonass Tracker User Manual

eeLink TK119 Glonass Tracker

Welcome to use our terminal， please read this manual carefully to install and operate the terminal exactly. This user manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail. Using the TK119 GPS tracker, we can position, monitor and control the vehicle on the position server via GPRS, GPS, GLONASS and Internet. It can help customers to manage transparently, reduce costs, maintain security and raise efficiency. Now it is widely used in business traffic, logistics distribution, automobile lease, intelligent transportation, shipping market, army, and police, rescuing, Safety Supervision, and Intelligent city.

Product Features

• Supports quad bands, i.e. 850/900/1800/1900MHz, universal in the world.
• Super Wide Input Voltage：9-72V DC.
• Support GPS / Beidou / Glonass precise positioning system, support A-GPS
• GPS data is uploaded by GPRS regularly, Web browser platform, Smartphone app platform, and SMS query.
• Supports ACC status checking and vehicle status notifying.
• Built-in battery, Power disconnect alarm & Low battery alarm.
• Built-in G-sensor, Vibration, collision, and falling alarm.
• GEO-fence alarm, speed & shift alarm.
• Use relay to remotely cut the oil
• Extend I/O port to add extension function
• Multiple protocol support, OTA upgrade program.
• Waterproof level IP67

Basic Specifications

TK119

TK119-GN

Components and Accessories

Components

Accessories（reference pictures）

Relay for remote cut-off/resume oil, Please note that these functions need the device equipped with the matched accessories.

SIM card Installation

Open the packing case, then check if the terminal is OK and the accessories are intact, or please contact your dealer; You need a suitable SIM card for using the terminal, please contact your dealer if you have any questions ;

Insert the SIM card until cannot move it inside anymore;

waterproof silicone must be put

Tighten the screws after put the cover correctly

Note:

• Please cut off the power before installing or uninstalling the SIM card.
• The SIM card should support GPRS and the GPRS should be opening.
• Inquiry by call needs the SIM card supporting the calling line identification presentation.
• If you enable the PIN code of the SIM card, please use your mobile phone to disable the PIN code.
• Please make sure that the SIM card has a sufficient balance.

Terminal Installation

Install the terminal
Suggest installing the terminal concealed by the dealer designated professional body. Please make sure to install the terminal with this side upward, and use a wide strong double-sided adhesive sponge to fix it. Please make sure to install the terminal with this side towards the ground, and use a wide strong double-sided adhesive sponge to fix it.

Installation Notice

• Hide the terminal properly inside the car body in order to avoid damage.
• Keep the terminal away from RF emission sources such as backing radar, car burglar alarms, and other vehicle-mounted communication devices.
• Suggest using a wide strong double-sided adhesive sponge to fix it, or use cable ties and other liable methods to fix it.
• Device Built-in GSM antenna and GPS antenna, Installation should ensure that the receiving side facing up (towards the sky) without the metal cover on the top of it, otherwise may weaken the antenna signal, Causing the device to not work correctly.

The recommended installation location:

1. The hiding place below the front windshield trim panel;
2. The hiding place around the front dash(if the surface is not made of metal);
3. The place under the rear windshield;

Terminal wiring definition

Power cables and another interface for remote control

The standard input voltage of the terminal is 7V-72VDC, so please choose our original power cables, the red cable is positive and the black cable is negative; Please ground the positive pole separately or ground it to ground connection, not to any other ground. Connect the ACC cable (orange cable) to the ACC switch of the vehicle, then the position server can get the information about the vehicle power; the ACC cable can also be connected directly to the positive pole of the vehicle power, then the position server think that the vehicle is always ignited. Connect the 4# cable (yellow cable) to the 86 terminal(with a small yellow cable) of the relay. Use cable ties to fix the relay to a waterproof place, or use plastic bags to cover the relay .

Relay wiring
Relay wiring diagram shows how to wire the relay to control the fuel pump:

1. Connect the 85 terminal(with small white cable) to the positive pole of the vehicle power (+12V/+24V), connect the 86 terminal(with small yellow cable) to the 4# cable of the terminal.
2. Cut off the positive pole of the fuel pump, next serial connect the positive pole to the 87a terminal(with think green cable) of the relay, and connect another pole to 30 terminal(with think green cable), showing as in the figure.

Bottom of the relay Wiring Diagram

Notice:
Be sure that the voltage of the vehicle power should match up to the working voltage of the relay, or the relay will be damaged.

Power On / Off

Power on
Power on: insert a valid SIM card and wire all the cables, then the terminal power on itself.

LED Indicators
The red LED flickers fast when the terminal is searching for GSM network, it flickers intermittently when the terminal has registered the GSM network successfully. The blue LED flickers fast when the terminal is searching for the GPS satellite signal, it flickers intermittently when the terminal has searched the satellites and can be positioned.

Red LED(indicates GSM working state)

Blue LED(indicates GPS signal state)

Power off
Disconnect the external power and take off SIM card, after a while the terminal will shut down.

Inquiry/Monitoring/Cut Oil

Inquiry by service platform

Web Browser platform
Login the service platform and enter your ID and password to check the position of the terminal. Please ask your dealer for the WWW address of the position service platform.

Smartphone applications
You can use a smartphone to check the terminal’s position. We have prepared for you the Android client (Android), and Apple clients (IOS), please check with your dealer to get the installation package.

Inquiry by SMS
You can write a positioning SMS sending to the terminal to inquiry terminal position, the terminal will reply position SMS or map link. For the SMS commands please refer to the Operation Commands.

Cut Oil /Restore

Cut off oil circuits
The position server or the managers can send cut-off fuel commands when needed. The fuel of the vehicle will be cut off on the premise of safety, and the vehicle will not be powered on.
To make sure the safety of the vehicle, the fuel of the vehicle will be cut off only if the terminal has positioned by GPS and the speed of the vehicle is less than 20KM/h or the vehicle is not moving.

Recover oil circuits
The position server or the managers can send recover-fuel-circuit commands to the terminal when needed, the terminal will recover the fuel circuits of the vehicle.

Terminal Alarm

Vibration Alarm
Conditions: When the Vehicle Vibration occurs.

Note: You need to set vibration sensitivity and time, there is an alarm switch.

Collision/falling Alarm
Conditions: When the Vehicle Collision or falling occurs.

Speed Alarm
Conditions: When the vehicle is over and below the set speed.

Note: You need to set the low-speed limit and high-speed limit.

Shift Alarm
Conditions: When the vehicle occurs the set shift in the Flameout state.

Note: Only valid in flameout state and vehicle occur the set shift distance.

Geo-fence Alarm
Conditions: when the vehicle enters/exits / across the Geo-fence.

Note:
You need to set the conditions of crossing fence, fence types and so on.

Power disconnect Alarm
Conditions: When the device is disconnected from external Power.

Low battery Alarm
Conditions: When the device is disconnected from external Power and built-in battery power falls below a certain value.

Note:
When the above alarm occurs, the terminal will send an alarm to the service platform, meanwhile sending an SMS message to the administrator number if the number is set. Alarm parameters must be set before work in 8.1, 8.3, 8.4 & 8.5 , Please refer to the

Terminal Setting
Please refer to the

Troubleshooting

Platform Cannot connect
The terminal is never online on the position server when installed at the first time. Please check the terminal:

1. If the power cables wired correctly? Pay attention to not connecting them to the controlling cables of the vehicle.
2. If the SIM card is installed correctly? Please refer to the installation instructions.
3. Check the status of the LED indicators. If the terminal is OK, the red LED and the blue LED will intermittently flick.
4. Inquiry the parameters of the terminal via commands and check the accuracy of the parameters.

Offline status
First check if the LED indicators are OK, if cannot check them, you can check the SIM card by following next steps:

1. call the SIM card of the terminal and check if you can hear the connecting ring.
2. Check if the vehicle is in an area where there is no GSM signal.
3. Check if one terminal or all terminals are offline in the area where the terminal is offline. If all terminals are offline, you should ask the network operator If the network is OK.
4. Check if the SIM card has enough balance.
5. If the terminal becomes offline on the last day of one month, please check GPRS is closed or not.
6. Inquiry the parameters of the terminal via commands and check the accuracy of the parameters.

No positioning
If the GPS is active, but the terminal cannot be positioned for a long time, please check the terminal:

1. If the vehicle is in a place where there is no GPS signal.
2. The upside of the terminal should be installed with a face toward the sky.
3. The GSM and GPS signal may be weakened if the terminal is installed in a place with electromagnetic wave absorption material(such as metal blocks), special attention should be paid if there is a metal thermal insulation layer or heating layer on the front windshield, so that the position accuracy will decline, and the severe ones will not be positioned.

Position drift
Serious position drift will be found in places where the GPS signal is poor. Please drive the vehicle to the open places.

Commands receiving abnormally

1. Check the format of the command.
2. Check if the vehicle is in the places where there is a GSM signal.
3. Check if the SIM card is properly installed.

Warranty rules

Special statement

1. Technology changes without notice.
2. If the color and appearance are inconsistent with those for the actual product, the latter will prevail.
3. The warranty card is only valid for the terminals with the following IMEI.
4. Please take care of the warranty card and show it with the original purchase receipts when enjoying the warranty service.

Warranty period
From the date of purchase, the passive waste host has one year warranty.

After sales
Any of the following circumstances are not covered by the warranty, but maybe appropriate to pay for repair:

1. More than the warranty period.
2. Unauthorized removal or repair damaged.
3. Damage caused by improper installation, use, maintenance, and custody.
4. The IMEI label is torn or Obscured.
5. Warranty certificate and product models do not match or warranty certificate be altered.
6. Damage caused by force majeure.

References

• 该词条未找到_海词词典
• intelligent transportation是什么意思_intelligent transportation在线翻译_英语_读音_用法_例句_海词词典
• logistics distribution是什么意思_logistics distribution在线翻译_英语_读音_用法_例句_海词词典
• raise efficiency是什么意思_raise efficiency在线翻译_英语_读音_用法_例句_海词词典

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>