Klipxtreme KMM-410 Dual Monitor Mount Instruction Manual
- June 17, 2024
- KlipXtreme
Table of Contents
Klipxtreme KMM-410 Dual Monitor Mount
Important Information
Don’t worry… This mount may look like a super hard thing to install, but actually it’s made for people who think a screwdriver is just a drink.
This installation is easy, but please don’t get to it before you read this manual thoroughly.
If you find any roadblock during the installation, you can go to klipxtreme.com/submenu/support, where you’ll find several ways to contact our team of technical gurus. They’ll be happy to help you out!
What’s in the box
Check out the following graphic. That’s exactly what you should find in the package (along with the monitor mount, of course). If something is broken or missing, contact us and we’ll help you find a solution!
-
M4X12MM A(8PCS)
-
M4X25MM A1(8PCS)
-
L 13mm A2(8PCS)
-
M8 B1(1PC)
-
M8 B2(1PC)
-
M8 C(1PC)
-
M8X10MM D1(2PCS)
-
M4X5MM D2(4PCS)
-
M6X8MM E(3PCS)
-
Allen wrench 5×5 F1(1PC)
-
Allen wrench 4×4 F2(1PC)
-
M6 G(1PC)
-
H(1PC)
-
I(1PC)
What do you need?
If you want to install it with the clamp, nothing!
But if you are planning to install it using the grommet, you’ll need a pencil,
a screwdriver, a drill and bit and a measuring tape. In pictures, just in
case:
What else do you need?
Well, you need to read what we call the don’t-say-we-didn’t-tell-you-so information:
-
Don’t mount a monitor over 8 kg or 17.5 lb.
-
Mount a monitor between 13 and 32 in.
WATCH OUT: Using this desk mount with products that exceed the indicated weight and size limits could cause instability, accidents and personal injury. -
This mount is compatible with the 100 x 100 VESA standard.
-
The bracket must be installed as indicated in this installation manual. Incorrect assembly could cause personal injury.
-
This product contains small items that may present a choking hazard if swallowed. Keep them away from children.
-
This product is designed for indoor use only. Using it outdoors could affect its stability.
FOR CURVED MONITORS: If installing a curved monitor, please use the associated hardware which is the M4X25mm (x8) bolts and L13mm spacers (x8).
Installation!
Everybody knows a book with pictures is better than a book with none. So, here’s the installation in pictures and (almost) no words. You are welcome.
Step 1A
Follow this step if you want to use the clamp to attach the monitor mount to
your desk.
Step 1B
Follow this step if you want to use the grommet to attach the monitor mount to
your desk.
Step 2
Note: Make sure the arm rotates smoothly after tightening.
Step 3
Step 4
Done!
Before we go, a little tip: check the installation periodically (every three months, at least) and make sure everything is in place and safe.
Don’t forget to upload your artwork to Instagram and tag your friends at
@klipxtreme.
See you online!
P.S. Technically, you have to read the following information:
Technical specifications
General information
| MPN | KMM-410 |
|---|---|
| Screen size supported | 13″-32″ |
| Load capacity (per screen) | 4.4-17.6 lb /per arm |
| VESA standards | 100 x 100 |
| Pivot angle | +90°~-90 |
| Tilt angle | +90°~-45° |
| Swivel angle | +90°~-90 |
| Cable management | Yes |
| Mounting profile | 505 mm |
| Desk base configuration | C-clamp & grommet (both included) |
Physical appearance
| Materia | Steel, aluminum, plastic |
|---|---|
| Color | Black |
| Product dimensions | 3.34 x 2.34 x 0.02 ft |
| Product weight | 7.7 lb |
Additional information
| Curved monitor supported | Yes |
|---|---|
| Package content |
- Mount
- Installation manual
- Mounting hardware
Klip Xtreme® is a registered trademark. All rights reserved. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any rights pertaining to, sponsorship by, or affiliation with those brands. Made in China.
