Etech EWL-22177-A 3 In 1 Wireless Foldable Charger User Manual
- June 9, 2024
- Etech
Table of Contents
Etech EWL-22177-A 3 In 1 Wireless Foldable Charger
Product Information
Earbuds
Earbuds are a type of headphones that fit snugly into your ear canal. They are designed for personal audio use, such as listening to music or taking phone calls. Our earbuds are made with high-quality materials to ensure durability and comfort. They come with multiple sizes of ear tips to customize the fit for your ears. The earbuds also have a built-in microphone and control buttons for easy access to phone calls and audio playback.
Product Usage Instructions
- Select the ear tip size that fits comfortably in your ear canal.
- Insert the earbud into your ear canal until it fits snugly.
- Adjust the position of the earbud for optimal audio and comfort.
- Use the control buttons to adjust audio volume, answer phone calls, and control audio playback.
- When not in use, store the earbuds in the included carrying case to protect them from damage.
Caution: Do not use the earbuds at high volumes for extended periods of time, as this may cause hearing damage. Also, ensure that you are aware of your surroundings while using the earbuds, especially when outside or in public areas.
Device Layout
Product Parameter
- Product name: 3 in 1 wireless charger
- Material quality: ABS + Silicone
- Dimensions: 24774.57.5MM
- Interface: C-C
- Input: 9V/3A
- Mobile phone output: 5W/7.5W/10W/15WV
- iWatch output: 2.5WN
- Earbuds: 5W
- Compatibility: support mobile phones, Earbuds, and iWatch that comply with the Qi standard
Operating Instructions
- Using the cable provided, connect the 3-in-1 Wireless Charger to a reliable wall adapter.
- Charging a Phone: Place your Qi compatible phone atop the phone charging area to begin charging.
- Charging a Watch: Place your iWatch atop the watching charging area to begin charging. It’s recommended that the watch charger either be flat or at a 90 degree angle for optimal charging.
- Charging Earbuds: Place your Qi compatible earbuds atop the earbud charging area to begin charging.
Precautions
- Keep product dry to avoid short circuits or other damage to electronical components.
- Avoid placing metal or magnetic items on the charging area which could result in overheating and product failure.
- Keep device away from high heat and flammable liquids and gasses. Avoid using in environments above 45C and below 0C.
- We strongly recommend using a high quality, certified wall adapter to provide power to this device. Failure to do so may result in slow charging speeds or product failure. Do not disassemble the product or replace any parts. In case of the damage to this item, please stop using the product immediately.
Packaging accessories
- 3 in 1 wireless charging *1
- C-C charging cable *1
- Mannual *1
- Packing box *1
The content of this manual and product specifications are subject to change without notice
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be coÿlocated or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>