Urban Vitamin Gilroy Earbuds P32970 User Manual
- June 14, 2024
- URBAN VITAMIN
Table of Contents
Urban Vitamin Gilroy Earbuds P32970 User Manual
GILROY EARBUDS
DEVICE LAYOUT
1- Charging case
2- Type-C input
3- Battery/Charging indicator
4- Earbuds touch function
5- MIC
PARING FOR DOUBLE EARBUD CONNECTION
The earbuds will turn on automatically when users open the charging case, and
will turn off when users put them back into the charging case and close it.
The earbuds will pair with each other automatically when they are on and enter
into pairing mode automatically. Not need to press any button. Turn on
Bluetooth on your device and select “Urban Vitamin Gilroy’’ to connect the
earbuds to your device.
HOW TO CHARGE THE EARBUDS
- Put the earbuds in the charging case and close it
- The light on the charging case will turn on and starts charging the earbuds
It takes around 1,5 hour to fully charge the earbuds
To charge the charging chase, connect the case with the Type-C cable to a
power source. It takes around 2 hours to fully charge the charging case.
FUNCTIONS
You can operate the earbuds with the touch function on the earbuds.
Please check below instructions.
- Play/pause music: Short press left/right earbud
- Pick up phone call: Short press left/right earbud
- Reject phone call: Double press left/right earbud
- End phone call: Short press left/right earbud
- Next song: Double press right earbud
- Previous song: Double press left earbud
- Volume +: Triple press right earbud
- Volume -: Triple press left earbud
- ANC on/off: Long (2 s) press left/right earbud
- Siri/Google Assistant: Double press left/right earbud
SPECIFICATIONS:
| Speaker driver (mm) | 10mm*2 |
|---|---|
| S/N Ratio (dB) | 100dB |
| Frequency range (Hz-KHz) | 20Hz-20KHz |
| Continuous playing time | 5 hours |
| Charging time earbuds | 1.5 hour |
| Battery capacity Earbuds | 45 mAh |
| Battery capacity Charging station | 500 mAh |
| Mic function | yes |
| Pick up function | yes |
| BT version | 5.0 |
NOTICE
1. Keep the product dry; do not place the product in damp places.
2. Keep out of direct sunlight and high temperatures High temperatures may
result in damage.
3. Keep out of cold temperatures, this will help avoid internal damage.
4. Do not disassemble the product.
5. Avoid dropping the product.
6. Do not continue to charge the product over 10 hours.
7. When charging use the Type-C charging cable that came with the product.
FAQ
How to reset the earbuds?
Delete the pairing name on your mobile phone and turn off the Bluetooth function on your phone. Turn off the earbuds manually by pressing the touch button pon both earbuds for 5 seconds. Then press the touch button for 10 seconds until you hear “pairing”
What to do if you cannot find the earbuds in the BT devices list?
Take out the earbuds from the charging case and wait until the LED light on the earbuds flash in white, or when you wear it in ear, you hear ” Pairing”). You then should be able to find the earbuds in the BT devices list. If not, please make sure this earbud didn’t connect to other device. If this isnt the case, do a factory reset.
Can I connect the earbuds to my computer or laptop?
Yes, but you can connect only if the computer and laptop have the Bluetooth function.
What to do when only 1 earbud connects?
If you need to use as mono one ( single bud), just pick only one side out of charging case, and could use only one earbud. If you need to use 2 earbuds together, then please pick another side out of charging case, and wait for it automatically connect to another side earbud. If another bud didn’t connect back, please do factory reset.
What if the music keeps playing when I put the earbuds back in the charging case?
Please make sure you put earbuds into charging case, and it shows red LED ( Red LED means charging), and then close charging case cover. Please make sure charging pin of earbuds and charging case is clear with no dirty which would cause charging issue, and please make sure earbuds were well touched by charging case. If above doesnt work, the charging case might be fully out of power and needs to be recharged.
What does the IPX version of my earbuds stand for?
IPX5 stands for splash proof.
What is the difference between ANC and ENC?
ANC is for shutting out external noise when wearing the headphone. ENC shuts out external noise during your phone calls so the receiver of the call can hear you clearly. Urban Vitamin Gilroy supports both functions!
EU Declaration of Conformity
Xindao B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xindao.com > search on item number.
DOWNLOAD
Urban Vitamin Gilroy Earbuds P32970 User Manual – [Download PDF]
Urban Vitamin Gilroy Earbuds P32970 Declaration of Conformity – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>