HIGH OCTANE EG103 Gaming Steering Wheel User Guide
- June 5, 2024
- HIGH OCTANE
Table of Contents
HIGH OCTANE EG103 Gaming Steering Wheel
Introduction
Thank you for buying this compact size racing wheel. It can be used with PC computer or Sony Playstation2® and Playstation3®. To fully enjoy vibration force and all of its features please read this manual before using the device.
System Requirements
- PC computer or Sony Playstation2/3®
- CD-ROM drive
- Windows XP /Vista / Windows 7 / Windows 8
Connections
Connect pedal module to the racing wheel base as shown on picture below:
Connecting to PC computer or Sony Playstation3®
Connect to free use USB port of PC computer or Sony Playstation3®. Before
connecting to PC computer please install driver first.
Connecting to Sony Playstation2®
Use special plug (as shown on picture below):3
Driver installation (PC computer only)
Insert driver CD into CD-ROM drive. Setup will start automatically, please follow on-screen messages to finish software installation. Once software is installed plug racing wheel into PC USB port. Windows will recognize and install new hardware automatically. You can check
Note! Strength of vibration force is controlled by game. If racing wheel need to be calibrated you can perform this operation from game menu – follow game instruction manual.
Troubleshooting
The driving system cannot be installed or there is no reaction while testing the steering wheel after installation. DirectX Version is too low. Please change to DirectX 9.0 version or up. There is no vibration from motor while playing racing games. Exit the game and reset. If it still cannot work normally, restart your PC. The intensity of the motor becomes weak after entering the games. Please read game manual in Configure controller section.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>