kogan KAMN27QFSB 27 Inch QHD IPS Freesync 75HZ Frameless Monitor User Guide

kogan KAMN27QFSB 27 Inch QHD IPS Freesync 75HZ Frameless Monitor User Guide

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.

• Do not open the back panel of the monitor as it contains a high-voltage current even when unplugged.
• Do not position the monitor on unstable surfaces. If the monitor falls, it may become damaged and may cause injury to those within its vicinity.
• Do not place the monitor near heat sources (for example, heaters, stoves, fireplaces).
• Do not place the monitor in areas lacking adequate ventilation.
• Do not place heavy objects on the monitor, power cord, or connected cables as this may cause damage.
• This monitor is designed with ventilation holes on the back panel. To maintain optimal performance, do not cover or block these holes.
• Do not insert or spray anything into the vents.
• Ensure the monitor is unplugged before cleaning.
• Do not expose cleaning alcohol, ammonia-based liquids, or other harsh cleaners to this monitor.
• Unplug the monitor if it will not be used for an extended period.
• The VESA mount and mounting accessories are not included.

The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

COMPONENTS

• A Monitor (x1)
  

• B Stand connector (x1)
  
  

• C Stand base (x1)
  

• D 16mm M6 stand base screw (x1)
  

• E VESA screw (x4)
  

• F DisplayPort cable (x1)
  

• G Power cable (x1)
  

• H User guide (x1)
  

OVERVIEW

Monitor controls

1. Power button

2. Directional arrows
   Ports
   

3. Power port

4. DVI port

5. HDMI port

6. DP connector

7. VGA connector

8. Audio input

STAND ASSEMBLY

1. Carefully remove the monitor (A) from the packaging with the foam attached, and place it face down on a soft cloth spread across a stable surface.
   
   Note:
   The monitor is fragile. Keep the foam underneath the monitor while assembling the stand.

2. Attach the stand base to the stand connector using the 16mm M6 stand base screw (D) provided.

3. Insert the stand connector (B) onto the back of the monitor (A). Push down until firmly connected.
   

4. Lift the monitor (A) straight up and remove the foam on the bottom. Stand the monitor (A) on the installed base
   

VESA MOUNT

1. Open the box and gently take out the monitor with the protection form attached and place it on a desktop or table. Remove the extra components and the foam covering the back of the monitor.
   Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.
   

2. Assemble the mount as per the instructions provided with the mount.
   

Notes:

• VESA mounting pattern 100 x 100mm, screw size M6.
• VESA mount and mounting accessories are not included

CONNECTIVITY

Power cable

Connect one end of the power cable into the monitor’s power port, then connect the other end to a power outlet.

Audio input

Connect the audio end of an audio to 3.5mm cable (not included) into the audio input on the monitor. Connect the 3.5mm end into your computer.

VGA

For the monitor to receive VGA signals from the computer, plug one end of a VGA cable (not included) into the VGA connector on the monitor. Connect the other end into the computer’s VGA output.

DisplayPort

For the monitor to receive DisplayPort signals from the computer, plug one end of the DisplayPort cable into the DP connector on the monitor. Connect the other end into the computer’s DP port

HDMI

For the monitor to receive HDMI signals from the computer, plug an HDMI cable (not included) into the HDMI port on the monitor. Connect the other end into the computer’s HDMI port.

DVI

For the monitor to receive DVI signals from the computer, plug one end of the DVI cable (not included) into the DVI port on the monitor. Connect the other end into the computer’s DVI output.

OPERATION

1. Connect the monitor to your input device via HDMI/DP/VGA/DVI.
2. Connect the power cable of the monitor into the monitor’s power port and the power socket. Switch the power socket on.
3. Press and hold the power button for 6 seconds to turn the monitor on.

Monitor control

You can easily control the functions of the monitor by pressing or sliding the Power button.

• Press and hold the Power button for 6 the monitor seconds to turn on/off.
• When the display is turned on. press and hold the Power button for one second to bring up the main menu.
• Press to confirm menu selections.

| | Slide left|

• When pushed left. the monitor will show the display mode menu. Use your to the desired cursor select mode and press Power to confirm.
• Used to reduce the intensity of a setting (for example. brightness settings)

| Slide right|

• When pushed right. the monitor will show the signal source menu. Use your cursor to select the desired source and press Power to confirm.
• Used to increase the intensity of a setting (for example, brightness settings)

| **| up| When pushed up. the monitor will show the GamePlus timer menu. Select the desired timing length and press Power to confirm. To exit the menu, push the power button up again.
| Slide down**| When pushed down, the monitor will show the GomePtus crosshair shortcut. Select the desired crosshair and press the Power button to confirm. To exit push the Power button up.

FreeSync

To use this feature, ensure your hardware has FreeSync capabilities, and that the graphics drivers are fully up to date.

After connecting the monitor, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in the graphics card menu.

Check your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

Note:
The feature is disabled by default when set to a 75Hz refresh rate.

ECO modes

This monitor features several pre-set colour modes for different computer uses to optimise your viewing experience. These modes include

• Standard (suitable for most activities)
• Text (optimised for reading)
• Movie (optimised for watching movies and videos)
• Game (optimised for general gaming)
• FPS (optimised for gaming that requires a high frame rate)
• RTS (optimised for real-time strategy games)

On-screen display (OSD) menu

The On-Screen Display (OSD) menu may be used to adjust your monitor’s settings (for example, appearance, modes).

When using the monitor for the first time, it will configure to the optimal settings automatically. If you would like to make manual changes, follow the instructions below:

1. Press the Power button to enter the OSD menu.
2. Slide the Power button up and down to the desired settings category you would like to change. Slide the Power button right to enter the sub-menu.
3. Slide the Power button up and down to browse through the sub-menu of settings. Press the Power button again to highlight the setting you wish to change.
4. If the settings are shown as a bar, slide the Power button left and right until the setting is adjusted to your liking. Once adjusted, press the Power button to confirm your changes.
5. Slide the power button left to exit the settings menu and to return to the main screen.

Refer to the below table for a detailed list of the OSD menu options.

/ GAME / MOVIE / FPS / RTS

| Selection of pre-set colour modes
DCR| On/ Off| Turns dynamic contrast ratio on/off
| Colour temperature| Standard|

•  Selection of pre-set colour modes (Standard, Warm, Cool, sRGB)
• Allows for manual configuration of the colour temperature (User Define)

Warm
Cool
sRGB
User Define
Red| ~0–100| Adjusts the redness of the display
Green| ~0–100| Adjusts the greenness of the display
Blue| ~0–100| Adjusts the blueness of the display
| Language| English, 简体中文, 한 한한 , Deutsch, Español, Français,

Italiano

| Sets the language of the OSD menu
OSD horizontal| 0~100| Adjusts the horizontal position of the OSD menu
OSD vertical| 0~100| Adjusts the vertical position of the OSD menu
OSD transparency| 0~100| Adjusts the transparency of the OSD menu
OSD time out| 10–60| Sets the duration the OSD menu remains on-screen after the last input (seconds)
| Input source| Auto Source / VGA / HDMI / DVI / DP| Auto-selection of input source and allows for manual selection
---|---|---|---
Mute| ON / OFF| Enables/disables the monitor’s speaker
Volume| 0–100| Adjusts monitor speaker’s volume
Reset| /| Restores the monitor to factory default settings
| Display size| Full Screen| Adjusts the display’s aspect ratio
4:3
Auto
Low blue| Off| Adjusts the amount of blue light emitting from the display
Weak
Strong
Over driver| On / Off| Turning this on will reduce the response time from the display. This may be useful for gaming when the fastest response times are needed.
FreeSync| On / Off| Enables / disables AMD FreeSync

CLEANING & CARE

Ensure the monitor is unplugged before cleaning.

• Use a clean, slightly dampened cloth to wipe the main monitor body.
• To clean the screen, wait for it to cool completely, then wipe with a dry micro-fibre cloth.

SPECIFICATIONS

• Screen size 27″
• Aspect ratio 16:9
• Power AC 240V, 50Hz, 1.1A
• Brightness 350cd/m2 (typical)
• Panel IPS
• Resolution 2560 x 1440
• Refresh rate 75Hz
• Response time 7ms with Overdrive enabled (14ms typical)
• Viewing angle ≥178°(H) / 178°(V)
• Contrast ratio 1000:1
• VESA mounting 100 x 100mm
• Colours 16.7M
• Signal input HDMI 1.4 x 1, DP 1.2 x 1, VGA x 1, DVI x1

Audio

• Speakers Yes
• Audio in Yes

Accessories

• Power cable Yes
• DisplayPort cable Yes

Additional functions

• Low blue light Yes
• Flicker-free Yes

Physical dimensions

• Dimensions (with stand) 613.8 x 537.4 x 247.2 (mm)
• Dimensions (without stand) 613.8 x 362.5 x 63.3 (mm)
• Net weight 5.5kg
• Gross weight 7.7kg

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Website: kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>