MiBOXER WL-Box1 2.4GHz Gateway User Manual
- June 6, 2024
- MiBOXER
Table of Contents
MiBOXER WL-Box1 2.4GHz Gateway
Please read the instructions carefully before using the controller.
Features
Compatible with 2.4GHz RF products; and controlled by MiBoxer APP through WiFi or 4G network.
Parameters
Model No.: WL-Box1
Input: DC5V/500mA (Micro USB)
Working Temperature: -20~60°C
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz RF: 2.4GHz Transmitting
Power: 6dBm
Product Weight: 23g
SET button
Long press “SET” 3 seconds to smart link mode, SYS pilot lamp blinking.
Note: Factory setting is Smart Link mode by default.
Installation
Please install the device within 30m as lights, and approaching the WiFi Router.
Pilot lamp illustrate:
| Device status | SYS pilot lamp | Link pilot lamp |
|---|---|---|
| Smart link mode | Blinking | OFF |
| Networking successfully | OFF | ON |
| Received signal | OFF | Blinking |
| Disconnected from network | ON | ON |
| Device malfunction | Blinking | Blinking |
User Instruction
-
Install MiBoxer APP. Click“ + ” add devices( See details on MiBoxer APP instructions).
-
Click “2.4G Gateway” on the device list to enter control interface.
-
Click “Change” to select compatible remote for the lights(Note: If you select wrong remote, you cannot control the lights).
-
Click “Link/Unlink”.
-
Link/Unlink method, See details on APP link/unlink instruction.
-
After linking successfully, back to the control interface to control the lights randomly.
Zone selection:
Click the “Zone” on the left bottom into the Zone selection. Note: Please
select the linked Zone, otherwise it cannot control the lamps.
Timer:
When the device get into Smart Link mode and re-configure, all the timers on
this device will be deleted.
Attention
- Before installation, please check the output voltage is in accordance with the device Rated Voltage.
- The input voltage is DC5V/500mA, Please do not connect the power supply over DC5V, otherwise, the device will be broken easily.
- Non-professional user cannot dismantle the divice directly, otherwise, it may damage the divice.
- The working temperature is -20~60°C; Do not install the device to direct sunlight, moist and other high temperature area.
- Please do not install the device around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
MiBoxer APP User Instruction
APP Downloading
For IOS System: Pls search “MiBoxer” on APP store.
(Above IOS9.0)
For Android System: search “MiBoxer” on Google Play
(Above Android 5.0) or Scan below QR-code to download APP.
Register MiBoxer Account
Open APP and click Register button;Complete the register and log in.
Add Device
1. Click the right top “+” on the device list.
2. Please select the device type you will add, then complete the adding
according to the hint of APP.
3. Back to device list after adding successfully, then pull down refresh in
list to get the device status.
Modify device name or delete device
Slide device list to left, click ” Edit ” to modify device name; click ”
Delete ” to delete device.
Note: If the device was shared to others, then the device will also be deleted
on your friends’ device list.
APP Control
Click the device that you want to dim on device list into dimming Interface.
Third Party Voice Control instructions
Search “Mi-Light Smart” on third-party platform APP and set up.
Click left top “Menu”” icon on the home page; Then click ” Voice Control ” to
check detailed instructions.
Note: The third party voice just control the lamps linked on selected
remote. (Not support Zone control)
Sharing Device
Share the device to friends, Let your friends can control this device.
- Click the left top ” ” icon on the home page.
- Click Shared DeviceClick ” ” to My sharing, then click”Add sharing” (Note: the receiving sharing device cannot be shared again).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>