ANKER A2054J11 PowerPort Speed 5 with Dual Quick Charge 3.0 User Guide
- June 6, 2024
- Anker
Table of Contents
Welcome Guide
PowerPort 5
Product Number A2124
Desktop Charger / USB Charger
51005001925 V02
Using Your PowerPort
- Plug it in
- Charge your phones and tablets
For the fastest and safest charge, use an Anker® able, your device’s original cable or a certified one (such as MFi).
Specifications
| Input | AC 100 – 240 V ~ 1.1 A 50 – 60 Hz |
|---|---|
| Output | 5.0 V 8.0 A 40.0 W |
(2.4A Max Per Port)
Average active efficiency| 86.1%
Efficiency at low load (10%)| 81.7%
No-load power consumption| 0.19 W
Size| 3.6 × 2.3 ×1.1 in /
91 × 58 × 27 mm
Weight| 149 g / 5.3 oz
Attention
| Don’t expose to liquids
---|---
| Don’t disassemble
| Avoid dropping
| Avoid extreme temperatures
Important Safety Instructions
- The product is suitable for use together with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 40°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, use only a dry cloth or brush.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
- The socket outlet shall be installed near the equipment and shall be easily accessible.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2124 is in
compliance with Directives 2014/35/EU & 2014/30 / EU & 2011/65/EU &
2009/125/EC.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
Customer Service
18-month limited warranty
Lifetime technical support
For FAQs and more information, please visit:
[email protected]
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)