DOMUS LINE Bathroom Lighting NITE Instruction Manual
- June 6, 2024
- DOMUS LINE
Table of Contents
NITE collection¹
INSTALLATION MANUAL
http://www.domusline.com/installation_manuals/3477500_NITE_r4.pdf
| phone | 0039 0434 595911 |
|---|---|
| fax | 0039 0434 923345 |
| info@domusline.com | |
| website | www.domusline.com |
WATCH THE VIDEO TUTORIAL FOR QUICK AND EASY INSTALLATION
https://www.youtube.com/watch?v=2PbEaeoOkts&list=PLI_4cmGK4dRW7vbRo4NeY0ywugOvsNjJ3
| Device in insulation class II. Connection to the earthing circuit is not
necessary.
---|---
IP44
| IP44 protection. The appliance is protected against water splashes.
****| Photobiological safety: The device belongs to the risk 0 group (EXEMPT)
in accordance with EN62471.
The product must be disposed of separately from urban waste, delivering it to
the collection centers established by the prevailing standard.
Adequate sorted waste collection contributes to preventing negative effects on
the environment and health and favors reuse and/or recycling
materials. Incorrect disposal of the product implies the application of the
administrative sanctions envisaged by the prevailing regulation.
| Device only for indoor installation.
TYPE
DESIGNATION| RATED
WATTAGE| T.COLOR
WW| T.COLOR
NW| T.COLOR
CW
---|---|---|---|---
NITE 305| 5,0W| 3000K| 4000K| 6000K
NITE 550| 7,0W| 3000K| 4000K| 6000K
NITE 800| 7,0W| 3000K| 4000K| 6000K
| Rated Voltage | AC 230V, 50/60Hz |
|---|---|
| Protection class | 2 |
| Degree of Protection | IP44 (indoor use only) |
¹ This installation manual contains instructions valid for all configurations
of the NITE device
WARNING:
Safety is guaranteed if these instructions are followed and therefore they must be kept. Installation may require qualified personnel to be involved. Before proceeding with the installation of the device ensure that the environmental conditions are in compliance with and suitable for the product characteristics. Before carrying out any operation on the device remove mains power.
SHELF INSTALLATION (fig. 1):
– Secure the light (A) to the shelf (B) using the provided screws (C).
INSTALLATION ON MIRROR (Fig. 2,3):
– Fix the spotlight (A) to the support bracket (E) with the screws (D).
-Insert the bracket (E) on the mirror (F) making sure its thickness does not exceed 6,5mm (Fig. 2).
– Secure the bracket (E) to the mirror (F) with the grub screw(G).
ELECTRICAL CONNECTION:
– Remove power from the mains.
– Connection of the power supply cable to the 230V mains must be carried out using the junction box (H) that is provided in the package.
– The power supply cable must not be accessible after installation of the
device.
– If the provided connector terminal is not used, used connection devices are
certified in compliance with the EN 60998 standard.
– House this device in an adequately sized box.
WARNING
– The Led MODULE, the power supply cable or any switch used, are not
replaceable, therefore in case of damage the device must be entirely
substituted.
– Do not use the device if the power cable and/or the connection cables are
defective. Defective cables and/or connectors must be immediately replaced by
qualified personnel authorized by DOMUS Line.
– Never run any cable through sharp corners and edges.
– Never run the cable over hot parts and always protect it against contact
with liquids.
– Install the device in a position that is out of the reach of children.
– If the cable needs to be secured use only insulated clips or plastic cable
ties.
– Ensure that the cable is not crushed between the wall and the mirror.
– Never use extension cables that are not compatible with the original
connection system.
– Before cleaning the device ensure that you have switched it off and wait
until it has cooled.
– Never immerse the device in water.
– To clean the metallic parts of the device use a soft and dry cloth and
never, under any circumstances, use liquid detergents, abrasive products or
similar items that could irreparably scratch and damage the surface.
– For stubborn dirt a cloth slightly dampened with water may be used. In this
case, never bring the cloth into contact with
the live electrical parts (cables, connectors, etc.), and after cleaning, dry
the device very well and ensure that no residual dampness remains.
WARRANTY
– The warranty on the device is valid only if powered by a power supply provided by DOMUS Line. The warranty’s general terms and conditions for this device are available at www.domusline.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>