JETSON JJUP3W-BLK Jupiter Mini 3 Wheel Light-Up Kick Scooter User Guide
- June 6, 2024
- Jetson
Table of Contents
Jupiter Mini 3 Wheel Light-Up
Kick Scooter.
A guide for your ride.
Model: JJUP3W-BLK
Remember to be safe and most importantly, have fun!
What’s in the Box
1. Handlebar
2. Stem Clamp
3. Stem
4. Quick Release Lever| 5. Front LED Light-Up Wheel
6. Deck
7. Rear Foot Brake
8. Rear LED Light-Up Wheel
9. Headlight
---|---
Specs & Features
- Product Dimensions: 22″ × 10″ × 22.5″
- Product Dimensions Folded: 22″ × 10″ × 5.25″
- Handlebar Extension: 22.5″- 29.5″
- Deck Size: 21.7″ × 5.2″
- Wheel Size: F: 4.7″; B: 3.5″
- Product Weight: 7 lb
- Weight Limit: 132 lb
- Battery Type: 3 AA (Not Included)
- Recommended Age: 3+
Get Started
Folding / Unfolding the Scooter
- To unfold, pull the Stem up. Once you hear it click, it’s fully unfolded.
- Make sure the Stem and Handlebar are secure.
Adjusting the Handlebar
When you hear it click, tighten & close Stem Clamp to lock. Make sure the
Handlebar is secure.
CAUTION: The stem pin will not keep the stem secure, please make sure the
Stem Clamp is tightened and closed prior to riding.
Changing the Batteries
BATTERY DOOR
- Open the Battery Door with a screwdriver.
- Place 3 AA batteries inside.
- Close the Battery Door with that same screwdriver.
- You’re all set!
LED Lights
LED Light Functions
- Press the Power Button to turn on the LED Lights.
- You can cycle through 8 different light functions by pressing on the Power button (the 9th time will turn off the lights).
- To skip the cycle and turn off the lights hold the Power Button for 3 seconds Quick Note: Remember to turn off the lights when you’re done riding the Scooter to save battery life!
Using the Rear Foot Brake
*Adults must assist children in the initial assembly and adjustment procedures to fold/unfold product and adjust handlebar to height.
Make Moves
Riding the Scooter
- Place one foot in front.
- Place the other foot in back, at a 70-90° angle.
- Turn the handlebar to the left or right to make turns.
*Please Note: Images may not reflect exact appearance of actual product.
Care & Maintenance
CLEANING THE SCOOTER
To clean the Scooter, carefully wipe with a damp cloth, then dry with a dry
cloth. Do not use water to clean the Scooter, this may damage the frame.
FEW MUST-DO’S
- Keep away from fire and excessive heat.
- Avoid intense physical impact and/or severe vibration.
- Please ride the Scooter on a smooth, flat surface.
- Protect from water or moisture.
- Contact Jetson Customer Care if there are any issues with the Scooter.
STORAGE
- Store the Scooter indoors, in a dry place.
- Cover the Scooter to protect against dust.
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the product or any
components of the unit without instruction from Jetson Customer Support. This
will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION CAUTIONS
Do not lift the product off the ground while it is on and the wheels are in
motion. This can result in freely spinning wheels, which may cause injury to
yourself or others nearby. Do not jump on or off the product, and do not jump
while using it. Always keep your feet firmly planted on the mat sensors while
in operation. Always check the battery charge before using.
DISPOSAL OF USED BATTERY
Battery may contain hazardous substances which could endanger the environment
and human health. This symbol marked on the battery and/ or packaging
indicates that used battery shall not be treated as municipal waste. Batteries
should be disposed of at an appropriate collection point for recycling. By
ensuring the used batteries are disposed of correctly, you will help
preventing potential negative consequences for the environment and human
health. The recycling of materials will help to conserve natural resources.
For more information about recycling of used batteries, please contact your
local municipality waste disposal service.
Safety Warnings
- Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use.
- Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning properly; That any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition; That tires are in good condition, inflated properly, and have sufficient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
- Components shall be maintained and repaired in accordance with the manufacturer’s specifications and using only the manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
- Warning against recharging non-rechargeable batteries.
- Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive train, while the motor is running.
- This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
- Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
- Adult supervision is required.
- The rider should not exceed 132lb.
- Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause uncontrolled operator/passenger actions or reactions.
- Never use near motor vehicles.
- Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
- Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
- Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.
- Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be encouraged to highlight (for conspicuity) using lighting, reflectors, and for low-riding units, signal flags on flexible poles.
- Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.
- Do not ride at night.
- Do not ride after drinking or taking prescription medication.
- Do not carry items when riding.
- Never operate the product barefooted.
- Always wear shoes and keep shoelaces tied.
- Make sure your feet are always placed securely on the deck.
- Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certification, and any other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.
- Always give way to pedestrians.
- Be alert to things in front and far away from you.
- Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
- The product cannot be ridden by more than one person.
- When you ride the product along with other riders, always keep a safe distance to avoid a collision.
- When turning, be sure to maintain your balance.
- Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
- The brake may become hot while operating, do not touch the brake with your bare skin.
- Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death.
- If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Support.
- Replace worn or broken parts immediately.
- Check whether all safety labels are in place and understood before riding.
- The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all components of the unit before use.
- Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
- Recommended for indoor use.
- Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
California Proposition 65
WARNING:
This product can expose you to a chemical such as Chromium that is known to
the state of California to cause cancer or birth defects or other reproductive
harm.
For more information go to
www.p65warnings.ca.gov/product
NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Loving the ride?
Leave a review on ridejetson.com/reviews or
share your photos with us online using the #RideJetson hashtag!
Questions? Let us know.
support.ridejetson.com Hours of Operation: 7
Days a Week, 10am-6pm US 1-888-976-9904
| UK +44 (0)33 0838 2551
www.ridejetson.com
Follow us @ridejetson
MakeMoves
Imported by Jetson Electric Bikes LLC.
86 34th Street 4th Floor, Brooklyn NY 11232
Date Code: 12/2020 Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>