JETSON JSPHER-BLK Sphere All-Terrain Hoverboard User Guide
- June 5, 2024
- Jetson
Table of Contents
JETSON JSPHER-BLK Sphere All-Terrain Hoverboard
What’s in the Box
- Top LED Lights
- Power Button
- Charging Port
- Charger
Please fully charge the battery prior to use
Specs & Features
- Weight Limit: 220 lb
- Product Weight: 17 lb
- Product Dimensions: 23.50” × 7.50” × 7.25”
- Recommended Age: 13+
- Tire Size: 6.5” All-Terrain Tires
- Max Speed: Up To 10 mph
- Max Range: Up To 10 Miles
- Battery: 36V, 2.0Ah Lithium-Ion
- Motor: 400W Dual Hub
- Charger: UL LISTED, 110-240V
- Charge Time: Up To 3 Hours
- Climbing Angle: Up To 10°
Remember to be safe and most importantly, have fun!
Get Started
Charging the Battery
- Only use the included charger
- Plug the charger into the wall before the Charging Port
- Don’t turn on the Sphere while it’s charging
- Charge the battery until it is fully charged – up to 3 hours
- Replace the cover over the Charging Port when done
Indicator Lights
How to Recalibrate
Follow these 3 simple steps…
- Place the Sphere on a flat, level surface.
- Hold the Power Button (for about 5 seconds) until you are notified of a successful recalibration.
- Restart the Sphere by turning it off and then on.
*Adults must assist children in the initial adjustment procedures of the product.
Make Moves
Riding the Sphere
Please Note: Images may not reflect exact appearance of actual product.
Care & Maintenance
RIDING RANGE
The maximum range is 10 miles. However, many factors will affect how far you
can go per charge:
- Driving Surface: A smooth, flat surface will increase driving distance.
- Weight: More weight means less distance.
- Temperature: Ride, store, and charge the Sphere above 50°F.
- Maintenance: Timely battery charging will increase driving distance.
- Driving Style: Frequent starting and stopping will reduce driving distance.
CLEANING THE Sphere
To clean the Sphere, carefully wipe with a damp cloth, then
dry with a dry cloth. Do not use water to clean the Sphere, as the electrical
and electronic systems may get wet, resulting in personal injury or
malfunction of the Sphere. If the electric parts or battery get wet, do not
power on the Sphere. Please contact Jetson Customer Support for assistance.
BATTERY
- Keep away from fire and excessive heat.
- Avoid intense physical shock, severe vibration, or impact.
- Protect from water or moisture.
- Do not disassemble the Sphere or its battery.
- Contact Jetson Customer Support if there are any issues with the battery.
STORAGE
- Fully charge the battery before storing. The battery should be fully charged once a month after this.
- Cover the Sphere to protect against dust.
- Store the Sphere indoors, in a dry place.
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the product or any
components of the unit without instruction from Jetson Customer Support. This
will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION CAUTIONS
Do not lift the product off the ground while it is on and the wheels are in
motion. This can result in freely spinning wheels, which may cause injury to
yourself or others nearby. Do not jump on or off the product, and do not jump
while using it. Always keep your feet firmly planted on the mat sensors while
in operation. Always check the battery charge before using
DISPOSAL OF USED BATTERY
Battery may contain hazardous substances which could endanger the environment
and human health. This symbol marked on the battery and/or packaging indicates
that used battery shall not be treated as municipal waste. Batteries should be
disposed of at an appropriate collection point for recycling. By ensuring the
used batteries are disposed of correctly, you will help preventing potential
negative consequences for the environment and human health. The recycling of
materials will help to conserve natural resources. For more information about
recycling of used batteries, please contact your local municipality waste
disposal service.
Safety Warnings
-
Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use.
-
Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning properly; That any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition; That tires are in good condition, inflated properly, and have sufficient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
-
Components shall be maintained and repaired in accordance with the manufacturer’s specifications and using only the manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
-
Warning against recharging non-rechargeable batteries.
-
Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive train, while the motor is running.
-
This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
-
Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
-
Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
-
Adult supervision is required.
-
The rider should not exceed 220 lb.
-
Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause uncontrolled operator/passenger actions or reactions.
-
Never use near motor vehicles.
-
Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
-
Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
-
Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.
-
Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be encouraged to highlight (for conspicuity) using lighting, reflectors, and for low-riding units, signal flags on flexible poles.
-
Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions
that may make them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use. -
Do not ride at night.
-
Do not ride after drinking or taking prescription medication.
-
Do not carry items when riding.
-
Never operate the product barefooted.
-
Always wear shoes and keep shoelaces tied.
-
Make sure your feet are always placed securely on the deck.
-
Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certification, and any other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.
-
Always give way to pedestrians.
-
Be alert to things in front and far away from you.
-
Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
-
The product cannot be ridden by more than one person.
-
When you ride the product along with other riders, always keep a safe distance to avoid a collision.
-
When turning, be sure to maintain your balance.
-
Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
-
The brake may become hot while operating, do not touch the brake with your bare skin.
-
Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death.
-
If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Support.
-
Replace worn or broken parts immediately.
-
Check whether all safety labels are in place and understood before riding.
-
The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all components of the unit before use.
-
Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
-
Recommended for indoor use.
-
Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
California Proposition 65
WARNING:
This product can expose you to a chemical such as Cadmium that is known to the
state of California to cause cancer or birth defects or other reproductive
harm. For more information go to www.p65warnings.ca.gov/product
NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
CONFIDENTIAL FILE INFORMATION
- DATE: 10/08/2020
- FILE NAME: Sphere-MANUAL.indd
- FOLDED SIZE: L4.321” H11” | L10.97cm H27.94cm UNFOLDED: L17” H11” | L43.18cm H27.94cm BLEED: .125” ALL SIDES
PRINTER SPECIFICATIONS
SCALE: 100%
MATERIALS:
- 350g C2S
- Printed double sided: 4C
FINISHING/NOTES AND SYMBOLS:
TRIM TO SIZE, SCORE, FOLD and GLUE IN SPECIFIED AREAS.
SCORE
FOLDING INSTRUCTIONS:
FOLLOW THE SCORING LINES 8 PANEL ROLL FOLD
DO NOT PRINT COMMENT, SCORING OR DIELINES LAYERS!
Physical sample according to specs must be approved by JETSON BIKE before
proceeding to production. COMMENTS (Internal reference only) File created by
Eitan Adika & Angelina Zavilevich
Enjoying the ride?
Leave a review on ridejetson.com/reviews or
share your photos with us online using the #RideJetson hashtag!
Questions? Let us know.
support.ridejetson.com
Hours of Operation: 7 Days a Week, 10am-6pm
US 1-888-976-9904 | UK +44 (0)33 0838
2551
Manufactured in China
Imported by Jetson Electric Bikes LLC.
86 34th Street 4th Floor, Brooklyn, New York 11232
www.ridejetson.com
Follow us @ridejetson