KONICA MINOLTA KM C300i Multifunctional Office Printer Installation Guide
- June 6, 2024
- KONICA MINOLTA
Table of Contents
KM C300i Multifunctional Office Printer
Installation Guide
Remove transport bolts
Warning!
- You must remove the transport bolts from the backside before using the product.
Loosen the 4 transport bolts with
a spanner.
Remove the bolts including the
rubber parts and keep them for future use.
Close the holes using the cover
caps.
Leveling the washing machine
Warning!
- The lock nuts on all four feet must be screwed tightly against the housing.
- Loosen the lock nut.
- Turn the foot until it reaches the floor.
- Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter
-
Do not kink, crush or modify the water inlet hose.
Connect the water supply hose to the water inlet valve and a water
tap with cold water as indicated.
Note! -
Connect manually, do not use tools. Check if the connections are tight.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>