xmarto HD Wi-Fi Security Camera System User Guide

xmarto HD Wi-Fi Security Camera System

Safety Tips

1. Please do not put any fluid container on the product.
2. Please use the product in ventilated environment and prevent blocking the vents.
3. Please use included power supply with the product to prevent damage to the product.
4. Please use the product under its standard working temperature and humidity. (advised in this manual or distributor’s website)
5. Dust on PCB may cause short circuit. It is suggested to clean the dust on PCB timely to make the product work properly.
6. Please obey the regulation and policy in your country/ area during the installation of the product.

Working Diagram

Cameras & NVR

Camera 1 (WB Series)

Camera 2 (WW Series)

NVR (Network Video Recorder)

Extra Conditions You Need

1. Hard disk (if not included). Any SATA hard drive 250GB – 6TB, preferably surveillance hard drives. You can use the system without a hard disk if you don’t need it to record videos.
2. Internet. Like a PC, you can use it without Internet; but with Internet connection you can access remotely.

Setup the System

1. Use the included bigger power supply to connect the NVR to power.
   

2. Before mounting the cameras, use the included smaller power supplies to connect the cameras to power. The cameras images should display on the screen within minutes.
   

3. Bring all the cameras to their mounting spots, do not mount yet. Plug them to power, go back to your NVR, wait for 5 minutes to see if they work with the distance. If they do not, switch them to spots with less obstacles to the NVR. If they work, go ahead to mount the cameras.
   

Live View

Mouse Operations

1. Left Button
2. Mouse Wheel
3. Right Button

Tips: You may use your own wireless mouse.

Button

| Operation|

Does

---|---|---

Left Click

|

Single Click

| Select

Double Click

| Zoom window, switch between per channel and multi-channel view

Double Click

|

1. Set zone;
2. Switch channel sequence

Right Click

|

Single Click

|

1. Return / Exit;
2. Pop-out main menu

Wheel

|

Scroll

|

1. Change content
2. Zoom in / out after zoom button checked

Username and Password

• Default Username: admin
• Default Password: none (leave it empty, click OK to login)

Set a Password to Secure Your System

Right click to enter main menu – System setting – System admin – User; set a password for admin to secure your system.

Record Video

If your system was purchased with preinstalled hard drive, as soon as NVR & cameras get power, they start to record. You don’t need to do any operation.

How to Install a Hard Drive

1. Unplug your NVR from power. On the back of the NVR, use a screwdriver to unscrew and remove the hard drive dock cover.
   

2. Connect the SAT A power and data cables from the NVR to the corresponding ports on your HDD (as shown).
   

3. Holding the hard drive and the dock cover, line up the holes on the hard drive with the holes on the dock cover. Using a Philips screwdriver, screw the provided screws into the holes. HOD screws are typically included in the manual bag.
   

4. Gently place the hard drive into the dock. Assemble the cover.
   

Set Your Record Plan

The NVR loop record 247 with your hard drive capacity. We suggest not to change the default 247 recording plan.
If you want to change the plan, you can find it in System setting – Record setting.

0:00 AM – 6:00 PM, system records continuously (Time recording is ON)
6:00 PM -12:00 PM, system records only when motion detected. (Time recording is OFF and motion recording is ON)

Playback Video

In main menu – Video playback

Connect the Camera System to Internet

You can connect the NVR to internet either with WiFi, or hardwire to your router.

Connect with WiFi

In NVR menu – System setting – Network setting – Wireless Internet, select your WiFi and provide password to connect.

Connect with a Cable

Use an Ethernet cable to hard wire the NVR’s WAN port to your router, or to a WiFi repeater.

Within a minute or so, you should see the system status changes to ONLINE.

View with Mobile App

Install Mobile App

Install App. You can either scan the QR Code below to find the free mobile app, or search ‘xmartO WallPixel’ in App Store/ Google Play to find it. Install it and create an user account.

Add Your Camera System for Mobile View

1. On the NVR screen, right click mouse to enter main menu – System setting – Network setting, click “Show QR code” to obtain the Cloud ID QR code.
   

2. In App, tap+ and follow on screen guide, scan the QR code or input Cloud ID to add the system to App.
   

Tips: If you’ve set a login password on your NVR, please provide that password. In future whenever you change password on the NVR, please edit device in App to update to new password.

Playback on Mobile

In the WallPixel App, while viewing live video of the system, click Playback, you will enter the remote playback menu. Tap to switch to the camera you want to replay, tap to choose date you want to replay, use a finger to drag the time bar to select exact time, use 2 fingers to zoom the time bar so you can select accurate time. Then tap the play button to replay.

App Notifications

App Notifications

1. When motion detected, you will receive a push notification message, tap the message you can see the snapshot, tap ‘View Video’ you can video the motion-triggered videos.
   You can also access the message list in App MSG entry.
   

Enable/ Disable App Notifications

In App – Me – Setting, enable or disable the push notification.

Backup and Share Videos from App

While playback on App, tap Record to record video clips to mobile. Find the video clips in Snapshot/Record for sharing.

Share the Cameras with Families

In App – Share to enter Device sharing. Tap yes to generate QR code. Have your families to install the App and scan the QR code to view the cameras.

View on PC

1. Download and install PC Client Software CMS at, https://www.xmarto.com/downloads
2. Login with your xmartO App user account, your cameras will be automatically sync to this PC App.

Tips: you can also add your cameras to the PC CMS App with their Cloud IDs.

View on Mac

1. Download and install Mac Client Software CMS at, https://www.xmarto.com/downloads
2. Login with your xmartO App user account, your cameras will be automatically sync to this Mac App.

Tips: you can also add your cameras to the Mac CMS App with their cloud IDs.

CAUTION

The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

If you need help, please visit www.xmarto.com; or contact us via [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>