xmartO DY3034 Auto Track Outdoor Wireless Security Camera User Guide

xmartO DY3034 Auto Track Outdoor Wireless Security Camera

What’s In the Box

DISCLAIMER: The exact components of your system, images and quantities may vary depending on your model number
While these may vary, this QSG will address the setup and initial confiquration of vour NVR and cameras

NOTE: For best results, use the included accessories. Third party accessories may not work properly

Working Diagram

Product Overview

The NVR

NOTE: The maximum number of cameras you can connect to your NVR will be determined by the number of channels.

1. Power Input – Used to connect the included 12V DC power supply.
2. USB Port Allow for the connection of a USB mouse or a USB flash drive. Connect the included USB mouse to assist in navigating the NVR’s menu interface. Connect a USB flash drive to download video files from the NVR for long term storage or sharing.
3. HDMI Output – Allows for a video connection. If the TV/Moni- tor has an HDMI input, connect the HDMI cable from the HDMI Output port on the NVR to the HDMI input port on your TV/- Monitor.
4. RJ-45 (Ethernet) Port Used to connect the NVR to your modem/router for remote viewing. You can also connect your NVR to the Internet via Wi-Fi.
5. Reset- Used to hard reset your NVR to manufacturer settings.
6. Micro SD Card Slot – Allows for video storage. You can also add a SATA HDD to the NVR for mass storage.
7. NVR Antennas For Wi-Fi connection with all cameras.
8. VGA Output – Allows for video connection to a PC monitor.
9. 3.5mm Audio Output – Allows for audio output to a headph- ne or speaker.

The Cameras

NOTE:
Different types of cameras are included in this section. Please check out the camera included in the package and check out the details from the corresponding introduction above.
The actual appearance and components may vary with different model of product.

Connecting Your System

STOP
Connect all cameras locally before final placement to ensure that all components function properly.

1. Connect the NVR to a PC monitor or TV with included HDMI cable.
   NOTE: Monitor is required for initial setup. After completing the initial setup, your NVR does not need to be connected to a TV or monitor to view or capture recordings.

2. Connect the NVR LAN port to your router with included Ethernet cable. (Skip this step if you plan to connect the NVR to Internet via Wi-Fi)

3. Plug the USB mouse into the USB port on the NVR.

4. Connect the NVR to power with included bigger power adapter
   NOTE: Use the bigger 12V 2A power adapter with NVR so it has enough power.

5. To verify whether cameras are working, please ensure they appear on your TV/ monitor before mounting them. NOTE: Make sure NVR is in intended location before testing cameras.

6. Plug the cameras into wall outlets with included smaller power adapters.
   NOTE: you should see each camera appear on your IV/ monitor. You may now proceed to install cameras in the desired locations.

7. Bring cameras to desired mounting locations, power on them and go back to NVR screen, wait for 5 minutes to see if they can stream fluently. If a camera does not stream well, adjust it to a location with less obstacles in-line-of-sight from the NVR. If they stream fluently, go ahead to mount the cameras.
   NOTE: s elect a least interfered Wi-Fi channel so your NVR performs its best Wi-Fi capability. In NVR’s menu – System setting- Network
   NVR Wi-Fi hotspot, click “Adaptive Channel”For bigger NVR, in NVR’s menu – System setting – Network Setting- WiFi setting, click “Auto select WiFi channel”

Positioning Your NVR and Cameras

• Camera distance from NVR can reach up to 300 ft. wirelessly.
  Therefore, proper placement of the wireless NVR in your home will help ensure you achieve maximum coverage.

• Do NOT place near high voltage wires or other sources of electrical interference. Electrical interference will degrade the quality of the signal.

• Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the motion sensor.

• For dome cameras, they MUST be installed upside down for better waterproof performance and better motion sensor’s efficiency.

• For better motion detection performance, please install the camera anaularlv

Booting Up for the First Time

Startup Wizard

1. When you power on the NVR you will be prompted the Startup Wizard. Please follow the on-screen steps to complete the Startup Wizard.

2. The Network Setting screen of the Startup Wizard displays instructions on how to connect your NVR to the Internet. You can either hardwire the NVR to your router for Internet access, or connect the NVR to your Wi-Fi (Wireless network setting)

3. The Set Password screen of the Startup Wizard requires you to create an admin password for your NVR.
   Admin Account Creation
   By default, the username will be admin. It must remain admin upon your initial account configuration. However, you may add additional users at a later time.
   NOTE: Password can be any alphanumeric combination between 6 and 20 characters. Remember Your Password
   XMARTO strongly recommends writing down your password within the Quick Setup Guide. You will need it every time you log into your NVR and to remotely view on Smart Device.

4. This is the last screen you will see when you have successfully completed the Startup Wizard. Scan the QR code to install Wall Pixel App. NOTE: For additional configuration of your NVR, please refer to the complete user manual located on our support page at www.xmarto.com 

Using the Wall Pixel Mobile APP
Download and Install Application

1. Download the WallPixel app from the App Store or Google Play Store and install the application on your device.
   NOTE: Setup is the same for Smartphone Download and Tablet.

2. Create an account using an email address or phone number for the username and a password between 6-20 characters.

3. After completing the account setup, sign into the app and tap the “+” symbol to add a device. The WallPixel App will lead you through the rest of the setup process.

Connecting and Adding your Device
A device can be added to the Wall Pixel App by using the App’s Scan Local Network or through a QR Code Setup. With Scan local network function, your NVR will automatically be detected by the WallPixel App, making it easy. To use this preferred method, ensure your smartphone and NVR are both in the same network.

Add a Device
To add the NVR system to ApP, please make sure you’ve connected your NVR to Internet. You can connect it to Internet in the setup wizard, or in Network Setting.

Scan Local Network
If your NVR and smartphone are in the same network, tap Scan Local Network on the bottom, the App will find the NVR in the LAN, you can add it to App with a single tap.

If this method is not available, please use the QR Code Setup from step 4B below.
4B. QR Code Setup
To use the QR Code Setup, click the plus +sign and Scan, then hover your smartphone camera lens over the QR code labeled on the NVR. On the Add Device screen, enter the NVR login password. The NVR username is admin by default. If you are not the admin, login with your username credentials. (the password
set in step 6.3)
NOTE: The NVR login and WallPixel App login are different.

Using Wall Pixel CMS on PC and Mac

1. Download and install. Visit www.xmarto.com, in Download area, download and install the PC or Mac Apps.
2. Login with your phone App user account, your system will be automatically synced to the CMS.

Pairing an Add-on Wireless Camera
By default, each camera within your NVR kit comes pre-paired to the NVR. Additionally, your NVR has its own built-in Wi-Fi for secure, uninterrupted video transmission and recording. Pairing allows for the wireless transmission coming from the camera to be detected by the NVR. If you want to add more cameras to your system, the add-on cameras will similarly need to be paired to the NVR.

1. Power on the add-on camera using the camera power adapter. NOTE: This should be done locally at the NVR to avoid interference.
2. With the NVR connected to a TV/Monitor, click bottom and follow the on screen guide to pair your camera to the NVR For hiaaer NIVR riaht click and click “Add Cam bv WiEi” icon 
3. Once paired successfully, the new camera will appear in a vacant video field. NOTE: You cannot exceed the number of NVR channels you have. If you have an 8 channel system, the maximum number of cameras you can have paired is 8.
4. Your add-on camera has now been paired to the NVR using the NVR’s built in Wi-Fi. NOTE: Pairing a replacement camera is similar as pairing a new add-on camera. The only difference is you need to delete the old camera from NVR first, and then start pairing the replacement camera to NVR.

Frequently Asked Questions

1. Does my NVR have to be connected to the Internet to work?
   No, your NVR does not have to be connected to the Internet to work. You can view live feed and recordings by connecting it to a TV/Monitor via HDMI or VGA.

2. Will I be able to view my system while away from home?
   In order to view your wireless system remotely, your NVR will need to be connected to a modem/router either with the included Ethernet cable or via WiFi. You can view your system using the free WallPixel App on your smart device or CMS client on a PC/Mac,

3. How do the cameras transmit video to the NVR?
   Our NVRs have built-in Wi-Fi for communicating with the cameras. Each camera comes paired to the NVR by default, so your initial setup should be hassle free.

4. Why my camera’s PTZ control is not responding in real-time? (reaches to left & right ends)
   That normally means your camera is not having strong WiFi signal, Watch the camera while controlling from App, you will see it moves immediately on your control, but the live video is not feeding in real-time due to poor WiFi signal. Please mount the camera closer/ with less walls to your WiFi router/ NVR so it has at least 3-bar of WIFi to work smoothly, or simply use an Ethernet cable to hard Wire the camera.

5. Does my NVR have to be connected to a TV or monitor?
   For initial setup, you will need to connect your NVR to a TV or monitor. After completing the initial setup, your NVR does not need to be connected to a TV or monitor to view or capture recordings.

6. Why is the WallPixel App not accepting my password?
   The WallPixel apps will require two passwords to configure: one password will be used to login to the app itself and the second will be the admin password of your NVR. In order to add a device to the app, you will need to enter the NVR’s admin password.

7. Why can’t I connect using the WallPixel ApPp or CMS Software?
   If you are having trouble connecting using our mobile app or client software,
   A) your xmartO system may not be connected to a router,
   B) the latest firmware or client software may not be installed on your computer or mobile device or, C) the password may have been entered incorrectly or, D) You may need to restart your NVR and try again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>