xmartO WT2054/WT20512 PTZ WiFi Security Camera Instructions
- June 6, 2024
- xmarto
Table of Contents
xmartO WT2054/WT20512 PTZ WiFi Security Camera
How to setup WT2054/ WT20512 PTZ WiFi Camera?
Preparations
Install xmartO App and register an user account
Scan the QR code in manual, or search xmartO WallPixel in App stores to find
xmartO WallPixel App. Install the App and create an user account.
There a 2 ways to set up the WT series WiFi cameras.
-
Setup with an Ethernet cable. Connect the camera to your router with an Ethernet port, run App to find the camera and connect it to your WiFi.
(easier way) -
Setup through WiFi without a cable. Bring camera to configure mode, connect your phone to the camera’s WiFi, then follow on-screen guide to pair the camera to your home WiFi step by step.
Do it in any of the 2 ways will bring you to the same result.
The key is:
If you want to do it wirelessly without hard wiring to router, while asked
whether the camera has an Ethernet port, you should choose NO. Even it
actually has the Ethernet port.
If you prefer an easier way and hardwire the camera to router for setup, then
you should choose YES while asked whether it has an Ethernet port. Here is the
user manual, please follow steps in chapter 3 to setup the camera.
https://m.media-amazon.com/images/I/918B4oRP9JL.pdf
Tips: the illustrated camera in the manual may be different from the one
you purchased. Yet they do share the same features and same setup steps.
Please reach us via [email protected] if you
have any questions.
Unique solution ID: #1036
Author: Mark
Last update: 2020-04-27 05:19
Page 1 / 1
(c) 2021 Mark <[email protected]> | 2021-10-21 21:37
URL:
https://www.xmarto.com/helpcenter/index.php?action=artikel&cat=2&id=37&artlang=en