xmartO DT3034 IP Camera Firmware from PC User Guide
- June 6, 2024
- xmarto
Table of Contents
xmartO DT3034 IP Camera Firmware from PC
Upgrade xmartO IP camera firmware from PC
-
Read user manual and follow the steps to connect the camera to your Wi-Fi. (skip if you’ve done this.)
-
On your PC, download the IPC upgrade tool and new firmware.
IPC Upgrade Tool
Firmware Ver. 3.4.27 (for DT3034 & DT30320) -
On PC, install the IPC upgrade tool and run the program.
-
Click Refresh, you will see the camera displayed in the list, select the camera.
-
Click “Browse” to select the firmware rom file, open it.
-
Click “Upgrade” to update the firmware for your camera.
-
Enable the Auto Tracking of DT3034/ DT30320. In the xmartO phone App, go to Setting- Device Setting- Motion Detection Management- enable Motion Detection
Tracking. Save the setting.
Unique solution ID: #1045
Author: Mark
Last update: 2021-07-14 08:21
(c) 2021 Mark <mark@xmarto.com> | 2021-10-17 19:29
URL:
https://www.xmarto.com/helpcenter/index.php?action=artikel&cat=2&id=46&artlang=en