xmartO DZ2034 2K 3MP Auto-Track Rotation Wireless Security Camera User Guide
- June 6, 2024
- xmarto
Table of Contents
Smart PTZ Dome Camera
Command Codes
Warning To prevent fire or electronic shock, please install Warning and
use the camera according to local standards aa•
Note Do not turn the PTZ camera with your hands.
Notes
- Please installed and placed the camera firmly to avoid falling and body injury.
- Please keep the camera lens & cover clean to ensure the best video quality.
- To avoid damaging the product, do not use any corrosive liquid while cleaning.
- Please do not disassemble the camera without a professional guide. It may cause the camera to lose weather resistance.
- In the lightning environment, please install lightning protection equipment or unplug all connection cables to prevent lightning damage.
- Please keep this product away from Highfield devices such as microwave ovens.
- Do not use this product out of its working humidity and temperature.
- Avoid heavy pressure, falling, severe vibration, and immersion during transportation and storage.
Product Specifications
- Power supply: 100-240V AC to DC 12-14V/ 1000-2000MA.
- To ensure a stable power supply, use a power cable within 10ft (3m). In an environment -4°F (-20°C) or below, use a power cable within 5ft (1.5m).
- PTZ control protocol : Pelco-D / Pelco-P.
- Baud rate: 2400, 4800, 9600 (Selectable).
- Working temperature: -13-140°F / -25-60°C.
- Working humidity :590%RH.
- PTZ camera key features Presets, smart cruise, point to point scan, adjustable scanning speed, home point, Light control.
Steps to run a command code
Tips: am 0. x tray. w MW operating from NY*.
PTZ Command Codes
| 1 | Auto-scan | Description | The continuous horizontal scan lasts 48 hours |
|---|---|---|---|
| Turn on auto scan | In preset point, type in 39, and Go to/ Transfer | ||
| 2 | Limits scan | Description | Continuous horizontal scan from left limit to |
right limit lasts 48 hours
Set limit| Rotate to wanted left point, type in 9, and Set
Set right limit point| Rotate to the wanted right point, type in 10, and Set
Turn on limits scan| In preset point, type in 38, and Go to/ Transfer
3| Speed of Scan| Low speed| Type in 61 and set
Medium speed| Type in 62 and set
High speed| Type in 63 and
Higher speed| Type in 64 and set
4| Home point| Description| After auto-tracking, or no control within 3
minutes, the camera
automatically returns to the home point
Set home point| Rotate to wanted home point, type in 58, and tap Set
Turn on home point return| Type in 56, and Go to/ Transfer
Turn off home point return| Type in 56, and Set
5| Preset| Set preset points| Rotate to the wanted point, enter point number
(1-8), tap Set
---|---|---|---
Go to a preset point| Enter a preset number (1-8), tap Go to/ Transfer
6| Preset Cruise| Description| Automatically rotate to each preset point in
sequence and
stay, and stops after cruising 3000 cycles
Cruise 1-8 preset points| Type in 41, and Go to/ Transfer
Delete 1-8 preset points| Type in 41, and Set
7| Cruise scan per point stay time| Stay for 2-3 seconds| Type in 51, and Set
Stay for 4-5 seconds| Type in 52, and Set
Stay for 6-7 seconds| Type in 53, and Set
Stay for 8-9 seconds| Type in 54, and Set
Stay for 10-12 seconds| Type in 55, and Set
8| Auto tracking (works only for some models)| Set home point| Type in 58, and
Set
Turn on auto-tracking| Type in 96, and Go to/ Transfer (default off)
Turn off auto-tracking| Type in 96, and Set
Turn off auto zoom| Type in 97, and Set
Turn on auto-zoom| Type in 97, and Go to/ Transfer
9| Light control (works only for some models)| Turn on the lights| Type in 93,
and Go to/ Transfer
Turn off the lights| Type in 94, and Go to/ Transfer
Turn on Red/blue alarm lights during the day| type in 26, and Go to/ Transfer
Turn off Red/blue alarm lights during the day| Type in 27, and Go to/ Transfer
10| PTZ calibration/
Factory reset| Calibrate the PTZ| Type in 34, and Go to/ Transfer
Restore factory settings of PTZ| Type in 40, and Set
Statement
The content in this manual is only to provide guidance for users. It does not
guarantee the products you purchased have all the features. Please refer to
the actual product description.
Important: sometimes you may not see the image moving while navigating
your camera, or it reaches the end when you finally see the movie. This is
typically caused by the insufficient WiFi signal strength of the camera.
Please mount the camera within better WiFi reception, or hardwire the camera
to router/ NVR.