sygonix 2181463 Outdoor Wifi Socket Instruction Manual

: June 6, 2024
: Sygonix

sygonix 2181463 Outdoor Wifi Socket

Introduction

You build your smart network by using at least one device as a controller, and register end-node devices such as sensors, power meters, and actuators (e.g. motor) on the device. The mobile app allows you to control and manage all devices in your smart network.

General Information

Important Information

Observe information in a red frame to avoid harming yourself or others, and prevent product damage.
Give information in an orange frame special attention.
The blue frame provides tips on product use and features.

Conrad Connect

www.conradconnect.com

Your product is compatible with the Conrad Connect IoT platform.
Device integration with Conrad Connect requires a C onrad Connect Account.
You can set up an account at the given URL.

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2020 by Conrad Electronic SE.

Requirements

Network Connection

Security

It is strongly recommended that you set up your WiFi Router/WiFi Access Point (AP) to use the most secure encryption option it supports.

Subnetting

If you subnetted your network, the mobile device running the app and the devices of your smart network must be hosts on the same subnet.

Mobile App

Due to app updates, there may be some variations between the app and manual.

Get started

As a first time user follow the below steps:

Install the App.
Create a User Account.
Log in.

Install/Uninstall

Install the App

Apps are available for Android and iOS mobile devices.
Head to the respective app store and download the app named ‘Sygonix RSL RS2W’ onto your mobile device.

Notes on Uninstalling

When you uninstall the app, the settings are retained.
Settings become available again as soon as you re-install the app and log in with the same account.

User Account

Account settings are stored under your account in the cloud.

Create a User Account

A user account is required for you to operate the device.

Open the app.
Touch Register account.
Enter the requested details into the registration form and confirm with Submit.
A new account will be set up for you.
Wait until you receive the confirmation for successful setup.

Log in

Open the app.
Provide user name and password.
Confirm with Login.
If you are logged in successfully, the home page shows.

If you want to control smart devices from multiple mobile devices, install the app on every mobile device you wish to use and log in with the same account details on each mobile device.

Switch Accounts

Do the following to switch between accounts:

Open the app home page.
Touch to open the account settings.
Select Exit and confirm the prompt.
Log in with another account.

Manage your Account

Open the app homepage.
Touch to open the account settings:
| Personal settings
Update your account details.
---|---
| Change password
Change your account password.
| Connect to router
Connect to a different network
| Privacy Notice
Read the Privacy Notice.
| Help
Search for product-related documents

Home Page

The home page lists all devices that are under your account’s control.
When you log in for the first time, the device list is blank.

Main Controls

Device

Add a Device

During set-up keep the mobile device running the app and the device within receiving distance of the wireless access point (AP).

A device cannot be linked to two accounts. Adding a device to a second account will remove it from the first.

Make sure you know how to operate the device hardware before you start. Refer to its hardware instructions if necessary.

Connect your mobile device running the app to your WiFi network.
Connect the device to a wall socket.
Open the app home page.
Touch .
Follow the on-screen instructions.
Touch to refresh the device list.
The device shows on the device list.

The device menu gives you access to tools for device management. Access the menu as follows:

Open the device dashboard.
On the dashboard, touch the device icon to open the menu.

Control

Before you start controlling devices, note the following important points:

Attention!
Your connected device may not be designed for operation without supervision, and thus present serious danger under certain conditions. Never remote or autocontrol such a device.

If the power supply to the device interrupts, all connected device connections interrupt also.

The device’s socket is controlled independently of connected devices. If you turn off the device’s socket, the connected device is left unaffected.

Manual Control

You can manually control the device socket from three locations through the button:

Home page
Device dashboard
Device menu (includes status)

Set a Timer

The timer turns the device’s socket on or off respectively after the countdown expires. Do the following:

Open the device menu.
Select Timer.
Decide if the timer shall turn the socket on or off. Select the corresponding timer.
Set the time.
Touch to start. After the timer expires, the socket is turned on or off.

Schedules

Set a Schedule
Control the socket according to a preset schedule. Do the following:

Open the device menu.
Select Schedule.
Touch .
Enter schedule details into the schedule panel.
– Note: On and Off cannot occur at the same time.
Touch Save.
The schedule is added to the schedule view.

Modify a Schedule

Open the schedule view.
Hold down the schedule you want to edit.
Select Modify from the menu.
Edit the schedule.
Touch to save.

Delete a Schedule

Open the schedule view.
Hold down the schedule you want to delete.
Select Delete from the menu.
Confirm the prompt to delete the schedule.

Control Log

The control log logs device activity. The log shows you when and how the event was triggered (e.g. manually, through timer) and what the action was (e.g. turned off, turned on).