sygonix Solar wall light with PIR Sensor Instruction Manual

sygonix Solar wall light with PIR Sensor

Product Information

Specifications:

• Akku: 3.7 V, 2000 mAh, 7.4 Wh, Lithium-Ion
• Solarmodul: Monocrystalline 1 W
• Akku Charging Time: Approximately 10 hours (under optimal conditions)
• Akku Operating Time: Not specified
• Lightsensor Thresholds: ON: < 20 Lux / OFF: > 120 Lux
• Motion Sensor (PIR): Detection range: up to 5 meters
• Protection Class: IP54
• Brightness: Maximum of 1000 lm
• Protection Class: III
• Dimensions (W x H x D): 162 x 100 x 209 mm
• Weight: 425 g

Product Usage Instructions

1. Solar Module Placement:

Ensure the solar module is exposed to maximum sunlight for optimal charging. Place it where it can receive direct sunlight to ensure automatic activation at dusk.

2. Wall Mounting:

Use the provided wall bracket and mounting screws to securely mount the product on a suitable wall surface.

3. Battery Operation:

Ensure the battery is fully charged before initial use. Recharge the battery when the light does not turn on automatically at dusk.

4. Operating Modes Adjustment:

To adjust the lighting modes, ensure the ambient light has decreased and the motion sensor is active. Choose from Modes A, B, C, or D based on the desired functionality.

5. Cleaning and Maintenance:

To maintain optimal charging efficiency, regularly clean the solar modules with a lint-free cloth. Clean the product exterior as needed.

6. Disposal:

Dispose of the product at designated collection points in Conrad stores or other approved locations to ensure proper recycling or disposal.

Frequently Asked Questions

Problem: The light does not turn on.

Solution: Ensure the battery is not discharged. Recharge the battery if needed. Check for any obstructions blocking the light sensor or if the product is placed in a dark area.

For further assistance or technical support, please contact our customer service.

Intended use

The product is an LED lamp with motion sensor and light sensor. There are four lighting modes, and the battery is recharged by the integrated solar panel. The product has an IP54 ingress protection rating. It is resistant against dust and water splashing from all directions. Do not submerge. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

• Product with wall bracket
• 2x Mounting screws
• 2x Dowels
• Operating instructions

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

• The symbol warns of hazards that can lead to personal injury.
• The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
• This product is constructed according to protection class III.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

Li-ion battery

• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Installation

• When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged.
• Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

Product Overview

Choosing a location

Find a location that exposes the solar module to full sunlight to allow the rechargeable battery to recharge during the day.

Consider the following:

• The solar panel should be exposed to maximum sunlight. Do not set up the product in the shade or under any cover.
• Avoid the direct proximity of other light sources such as yard or streetlights, otherwise, the product will not switch on automatically at nightfall.

Wall mount

When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

1. Use the mounting plate as a template to mark holes on the surface.
2. Drill holes on the marked positions.
3. Attach the product using the supplied dowels and screws.
   Make sure the product is securely mounted before letting go.

Recharge batteries

Important:

To maximize charging efficiency, keep the solar panel(s) clean and free from debris.

Solar charge the battery under bright sunlight for at least 8 hours:

• Before first use
• After prolonged periods without exposure to sunlight e.g. rain.

Operation

Note:

There is an integrated light sensor that responds to ambient light levels. The product will be active when ambient light falls below a set level (nighttime). The product will deactivate when the ambient light rises above a set level (daytime).

Setting light modes

Preconditions:

• Ambient light levels have dropped, and the motion sensor is active.
• The battery is charged.

1. Press and hold the mode button to switch the power ON/OFF.
2. Press the mode button repeatedly to cycle through modes.
3. The different modes are as follows:

Notes:

• The indicator is relatively dim and may not be visible in bright conditions.
• If the rechargeable battery is getting low, the max. brightness levels may be lowered to prolong battery life.

Motion detection

For best motion detection:

• The subject should move across the sensor.
• The sensor should not be placed behind glass.

Note:

• The sensor should be mounted at a maximum height of 2.5 – 3 meters.
• Detection range: max. 5 m
• Detection angle: 120°

Troubleshooting

mode using the button.

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.

They damage the housing and can cause the product to malfunction.

• Do not immerse the product in water.
• Keeping the solar panels clean will maximize charging efficiency.
• Clean the product with a fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points

set up by manufacturers or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

• Rechargeable battery ………………… 3.7 V 2000 mAh, 7.4 Wh Li-ion
• Solar panel ………………………………. Monocrystalline 1 W
• Battery recharge time ………………… Approx. 10 hrs (optimum conditions)
• Battery life ……………………………….. mode A : 30.5 hrs
• mode B: 37 hrs
• mode C: >50 hrs (depends on PIR sensor activations)
• mode D: 18 hrs
• Light modes……………………………… Mode A:
  • 250 lm until dawn
  • Mode B:
  • 100 lm + PIR trigger 1000 lm (30 secs.)
  • Mode C:
  • OFF + PIR trigger 1000 lm (30 secs.)
  • Mode D:
  • 1000 lm until dawn
• Light sensor thresholds ……………… ON: <20 lux / OFF: >120 lux
• Motion sensor (PIR)…………………… Detection range: max. 5 m
• Detection angle: 120°
• Ingress protection……………………… IP54
• Colour temperature……………………. 4000 K (neutral white)
• Brightness………………………………… max. 1000 lm
• Protection class ………………………… III
• Operating temperature ………………. -20 to +40 °C
• Storage temperature………………….. -20 to +40 °C
• Dimensions (W x H x D) …………….. 162 x 100 x 209 mm
• Weight …………………………………….. 425 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2900986_V2_0224_dh_mh_en 9007200398311307-2 I2/O2

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>