sygonix 2226163 SY-PS-400 Smart WiFi Socket Strip Instruction Manual

SY-PS-400 Smart Wi-Fi Socket Strip
with 4 USB Charging Ports
Item No. 2226163
Operating Instructions

Intended Use

The product acts as a power socket and is equipped with a push button that turns the power supply to connected loads on and off. The product is equipped with 3 power sockets, 4 USB-A charging ports and over current (surge) protection.
An accompanying app controls the product (master on/off, individual socket on/off, 4 x USB-A on/off, countdown, schedule, power meter, and voice control).
The product is intended only for the connection to a standard power socket with earth contact.
Refer to the technical data section to learn more about the maximum permissible loads.
Warning labels in different languages are included in the package. Stick the language label in your language over or next to the language label on the product.
The product is only designed for indoor use. Keep away from water and high- humidity sources and the areas where these conditions occur (e.g. bathroom).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes other than those described above, the product may be damaged. In addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content

• Wi-Fi power strip
• Warning labels
• Operating instructions

Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

http://www.conrad.com/downloads

Explanation of Symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

Safety Instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/ guarantee.
a) General

• The unauthorized conversion and/or modification of the product is not allowed for safety and approval reasons. Do not open/disassemble!
• The product is designed in accordance with protection class I. Only a standard grounding mains socket of the public supply grid (a wall socket, for example) may be used as a power source.
• The mains socket to which the product is connected must be easily accessible.
• The product is not a toy and should be kept out of the reach of children. Position the product so it is out of the reach of children.
• The product is equipped with a child safety lock. An integrated mechanism will release the holes of the receptacle only, if the two prongs of a power plug are inserted into the two holes at once. Nevertheless, take special caution when children are around. Children cannot recognize the danger arising from the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!
• Do not leave the packaging material lying around carelessly as it may be a danger to children.
• Handle the product with care; it can be damaged by impacts, blows or falls even from a low height.
• If you have any questions that are not answered in this manual, please contact our technical service or another specialist.

b) Connected Devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

c) Mains Cable

• Completely unwind the mains cable when using the power strip.

• Lay the cable such that nobody will trip over it.

• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical stress.

• Avoid excessive thermal stress on the mains cable from extreme heat or cold.

• Do not modify the mains cable. Otherwise the mains cable may be damaged.
  A damaged mains cable can cause a deadly electric shock.

• Never use the product if the mains cable is damaged.

• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains socket.

• A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the manufacturer or a similarly qualified person, so as to prevent any danger.

d) Operating Location

• The product may only be used in dry interiors; it must not get damp or wet! Never position the product in direct vicinity of a bathtub, shower, bathroom, swimming pool, or similar. Lethal hazard due to electric shock!
• The product must not be exposed to extremes of temperature, direct sunlight or strong vibrations. Keep the product away from strong magnetic fields generated by machines, electric motors or loudspeakers.
• Do not operate the device in environments where there are high levels of dust, flammable gases, vapours or solvents. There is a danger of fire and explosion!
• The device can warm up during use. Make sure not to place it on sensitive surfaces.
• Do not use this product in hospitals or medical institutions. Radio waves may interfere with medical equipment. The same may also apply to other areas.

e) Handling and Use

• Never plug in, unplug or operate the product when your hands are damp or wet. There is a risk of a life-threatening electric shock! The same applies for the load that is plugged into the socket of the product.

• Never connect the product to the power supply immediately after it has been transferred from a cold room into a warm one (e.g. during transport). The condensation that forms might destroy the device. Moreover, there is danger of electric shock! Allow the product to reach room temperature. Wait until the condensation has evaporated. This might take several hours. Only then the product may be plugged into the mains socket and put into use.

• Always use the gripping surface to pull a mains plug out of the product. Never unplug a mains plug from a mains socket by pulling the cable.

• Never overload the product. Note the maximum permissible connected load in the chapter “Technical Data”.

• Do not connect in series! This can lead to an overload of the product! There is a risk of fire!

• Do not operate while covered! At higher connected loads, the product becomes warm, which can lead to overheating and potentially a fire if covered!

• Disconnect the product from the mains socket in thunderstorms for reasons of safety.

• Voltage-free only if unplugged

• Do not use the product if it is damaged. There is a risk of a life-threatening electric shock! In this case, dispose of the product in an environmentally correct manner.
  Safe operation can no longer be assumed if:
  – the product shows visible signs of damage
  – the product does not work at all or works poorly (leaking smoke or a smell of burning, audible cracking noises, discolouration to the product or the adjacent surfaces)
  – the product was stored under unfavourable conditions
  – it was exposed to heavy loads during transport

• Never pour any liquids above or next to the product. You run the risk of causing a fire or a fatal electric shock. If any liquid has still managed to enter the  evice, immediately switch off the power supply to the mains socket at which the product is connected (turn off the fuse/circuit breaker/residual current operated circuit
  breaker of the associated circuit). Only then can you unplug the product from the mains socket and contact a specialist. Do not use the product any longer.

• Always pull the product out of the mains socket (e.g. wall socket) before cleaning it or when the device will not be in use for a long time (e.g. for storage).

• Use the product only in a temperate climate, never in a tropical climate.

Control Elements

1 4x USB charging ports
2 Socket (switch 1)
3 Socket (switch 2)
4 Socket (switch 3)| 5 Power button Status indicator light
6 Power cable to plug
7 Socket status lights
8 Openings for wall mounting
---|---

Connection

• Connect the plug (6) to a regular grounded mains socket.
• Plug a load into an available socket (2), (3), (4) or USB socket (1).

Operation

a) Power Button Status Indicator Light

application.
Flashing slow blue (lx every 3 seconds)| Device is ready to be paired with application in AP mode

b) Power On

• Press the power button (5) to turn the power strip on/off.
• The status indicator light (5) and port status lights (7) turn on to indicate that power is being delivered to connected loads.

c) Socket Control
Individual sockets can be turned on or off remotely. Refer to the app manual to learn more about socket controls.
d) USB Charging Ports
The 4 USB charging ports can provide power to devices connected via USB cable (e.g. charging of mobile device), and do not serve as a data ports. See section “Technical Data”. All 4 ports can be turned on or off remotely. Refer to the app manual to learn more about port controls.
Over Current Protection
If the total current of the power strip exceeds the maximum permissible current (see “Technical Data”), the power strip turns itself off automatically.
Follow the below steps to restart the power strip:

• Remove the loads that make the total current exceed the limit.
• Press the power button (5) to turn the power back on.

Reset Device

• If the device is not functioning correctly you may need to perform a reset.
• Turn the power off and remove any connected loads.
• Disconnect the device from the mains power supply and wait 10 seconds before connecting again.
• Press and hold the power button for more than 5 seconds, release when the indicator blinks rapidly (about two times per second).

Maintenance and Cleaning

• The product does not require any maintenance. You should not open/disassemble it. Repair or maintenance work must be carried out by a specialist.
• Before cleaning, turn the product off and disconnect it from the power supply. Disconnect connected loads.
• You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with a soft, clean brush and a vacuum cleaner.
• Do not use aggressive chemical or scouring cleaning agents, as this may lead to discolouration or changes in the material on the surface.

Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search box. You can then download the EU declaration of conformity in PDF format.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical Data

a) Data according to EU regulation 2019/1782

Output voltage
Output current
Output power| USB-A 1: 5.0 V/DC, 2.4 A, max. 12.0 W
USB-A 2: 5.0 V/DC, 2.4 A, max. 12.0 W
USB-A 3: 5.0 V/DC, 2.4 A, max. 12.0 W
USB-A 4: 5.0 V/DC, 2.4 A, max. 12.0 W
USB-A 1+ USB-A 2 + USB-A 3 + USB-A 4: 5.0 V/DC, 4.2 A, max. 21.0 W
Average active efficiency| 84.%
Efficiency at low load (10 %)| 79.%
No-load power consumption| 0.10 W

b) Other
Rated input …………………………….. 230 V/AC, 16 A, 50 Hz
Rated power …………………………… max. 3680 W
Heat-resistance ………………………. 750 °C
Sockets ………………………………….. 3 x type F
Plug ………………………………………. Type F
Standby power consumption …….. 0.8 W
Over current (surge) protection …. 200 J
Child protection ……………………….. Yes
Wi-Fi ……………………………………… IEEE 802.11 b/g/n, 2.4 GHz
Frequency range …………………….. 2412 – 2472 MHz
Transmission power…………………. max. 20 dBm
WLAN security ………………………… WPA, WPA2, WPA/WPA2
WLAN range …………………………… 15 m
Protection class ………………………. I
Device name …………………………… SY-PS-400 Smart Wi-Fi Socket Strip
App OS ………………………………….. Android, iOS
Operating conditions ………………… 0 to 35 ºC, 5 – 75 % RH (non-condensing)
Storage conditions …………………… -10 to +60 ºC, 5 – 75 % RH (non-condensing)
Cable …………………………………….. length:1.5 m, OD: 1.75 mm², H05VV-F 3G 1.5 mm²
Dimensions (W x H x D) …………… 360 x 58 x 47 mm
Weight …………………………………… 707 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau ( www.conrad.com ). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing.

Copyright 2022 by Conrad Electronic SE.
*2226163_v4_0922_02_dw_mh_en

Documents / Resources

| sygonix 2226163 SY-PS-400 Smart WiFi Socket Strip [pdf] Instruction Manual
2226163 SY-PS-400 Smart WiFi Socket Strip, 2226163, 2226163 Socket Strip, SY- PS-400 Smart WiFi Socket Strip, SY-PS-400 Socket Strip, Smart WiFi Socket Strip, WiFi Socket Strip, Smart Socket Strip, Socket Strip, Strip
---|---

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>