sygonix SY-5801972 Solar Wall Light With Motion Detector Instruction Manual
- June 1, 2024
- Sygonix
Table of Contents
sygonix SY-5801972 Solar Wall Light With Motion Detector
Intended use
The product is an LED lamp with PIR sensor. The battery is recharged by the solar panel.
Important:
The product has an IP54 ingress protection rating. The product has limited
protection against dust and water splashing from all directions. The product
is suitable for outdoor use. Do not submerge the product in water.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the safety instructions and any accompanying instructions carefully and
store them in a safe place. Make this product available to third parties only
together with the safety instructions and any accompanying instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
- Product
- 2x Mounting screws
- 2x Dowels
- Operating instructions
Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This product is constructed according to protection class III.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Li-ion battery
- Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
- Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
- Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Installation
- When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged.
- Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Wipe the product using fibre-free cloth.
Disposal
Product
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
Rechargeable battery ………………… 1x 3.7 V 2000 mAh 7.4 Wh Li-ion
Solar panel ………………………………. Monocrystalline
Ingress protection……………………… IP54
Protection class ………………………… III
Operating temperature ………………. -20 to +40 °C
Storage temperature………………….. -20 to +40 °C
Dimensions (W x H x D) …………….. 209 x 162 x 100 mm
Weight …………………………………….. 425 g
Customer Support
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2900986_V2_0224_dh_ss_en 18014399637227531-2 I3/O2 en
