Sygonix 2998102 Camping Outdoor Ventilator Instruction Manual
- June 1, 2024
- Sygonix
Table of Contents
Sygonix 2998102 Camping Outdoor Ventilator
Specifications
- Product: Camping Outdoor Ventilator
- Item Number: 2998102
- Manufacturer: Conrad Electronic SE
- Address: Klaus-Conrad-Str. 1, D-92240 Hirschau
Product Usage Instructions:
- Disconnect the ventilator from the power supply before dismantling.
- Seek assistance from a professional if needed.
Dismantling Instructions:
- Step 1: Use a pry knife to remove the hood decoration ring.
- Step 2: Use a pry knife to remove the lampshade.
- Step 3: Pull out the internal wire carefully.
- Step 4: The LED module is fixed to the PCB board.
- Step 5: Take out the light source for SLR testing.
Note: Ensure to follow these steps in the correct order to dismantle the ventilator safely.
FAQ (Frequently Asked Questions):
Q: Can I dismantle the ventilator without disconnecting it from the power
supply?
A: It is highly recommended to disconnect the ventilator from the power
supply before dismantling to prevent any electrical hazards.
Dismantling Instructions
Camping outdoor ventilator
Item no: 2998102
Dismantling recommendations
- Disconnect from power supply.
- Ask help from a professional if needed.
Dismantling instructions
-
Step 1
Use a pry knife to remove the hood decoration ring. -
Step 2
Use a pry knife to remove lampshade. -
Step 3
Pull out the internal wire.
-
Step 4
The LED module is fixed to the PCB board. -
Step 5
Take out the light source for SLR testing.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE.
*2998102_V1_0324_hs_en 1275613451 I1/O1 en