emotn H1 Portable 5G WiFi Projector Full HD 1080P User Manual

EMOTN H1 PROJECTOR

USER MANUAL

1. Packing List

2. Function Overview

3. Quick Start

4. Installation

Tripod

A 1/4 threaded hole is reserved at the bottom of the projector to easily fit a 1/4 tripod. Please fix the tripod firmly to prevent the projector from falling down.

Kickstand Instructions

Step l. Open the kickstand with your finger.

Step2. Put the projector on a flat surface and turn on the projector.

5. Projection Connection

A. Wired Connection

B. Bluetooth Speaker Connection

1. Enter “Bluetooth Speaker Mode” via projector Bluetooth button. The Bluetooth name of the projector: Hl_Speaker.
2. Open your devices Bluetooth settings, search and pair the projector.
3. You can reset Bluetooth connection via long press for 2 seconds of projector Bluetooth button.

6. Placing the projector

The projector can be used to project onto a wall or screen, on a table. When projecting from the rear position, a special screen will be needed (not included) to display the image. Be sure to aim the remote at the sensor on the front or rear of the projector.

7. Projection Distance & Size

8. Specifications

9. Attention

10. Warnings and Precautions

1. Do not look directly into the projector light.
2. Don’t touch the projector lens.
3. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
4. . Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5. Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
6. Shock hazard – Please do not dismantle the projector without permission.
7. To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
8. Objects fill with liquids, such as vases, shall not be placed on the apparatus.

11. Troubleshooting

1. Blurry Image
   a. Adjust focus ring or keystone.
   b. Projector and screen/wall must be in effective distance.

2. Remote Control Unresponsive
   a. Make sure remote control points at IR receiver directly.
   b. Do not cover IR receiver window.
   c. Check the battery.

3. USB/TF Unrecognized a. Make sure your USB stick/TF card is not over 128GB.

4. No Sound
   a. Turn off Dolby Audio in your device.
   b. If a movie’s audio number is “ac3” (Dolby Digital), then the sound may not be played this kind of movie is very rare).

5. The projector can’t screen mirroring?
   a. Firstly, please kindly check whether the projector selects the Screen Mirroring input source and whether the device is connected to the projector WiFi.
   b. Please make sure the device and projector connect to the same WiFi if the projector features WiFi function.
   c. Please unplug the power and re-apply it again if the Screen Mirroring input source is selected and the WiFi is connected while the projector still can’t screen mirroring.
   d. Please reset the projector if it still can’t work after unplugging the power.

6. Fail to connect the “Bluetooth Speaker Mode”?
   a. Please open the projector “Bluetooth Speaker Mode and device Bluetooth setting.
   b. Long press for 2 seconds of remote control or projector button to reset.
   c. Please check if the device pair with the projector successfully.
   d. If the projector still can’t work when successfully paired, please restart the projector and re-apply it again.
   e. Please feel free to contact us.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>