emotn H1 Projector User Manual

emotn H1 Projector User Manual

PACKING LIST

Projector|
---|---
Remote Controller|
User Manual|
AV Cable|
HDMI Cable|
Power Adapter|

FUNCTION OVERVIEW

QUICK START

1. Connect the power cable to the projector.

2. Turn the knob clockwise to turn on the projector and adjust the volume to increase.

3. Connect your device to the projector correctly.
   

4. Play the next song or video.

5. Adjust the focus ring to get best image performance.

6. Turn the knob counterclockwise to reduce the volume and turn off the projecto

INSTALLATION

Tripod

A 1/4 threaded hole is reserved at the bottom of the projector to easily fit a 1/4 tripod. Please fix the tripod firmly to prevent the projector from falling down.

Kickstand Instructions

Step1. Open the kickstand with your finger.
Step2. Put the projectior on a flat surface and turn on the projector

PROJECTION CONNECTION

A. Wired Connection

1
| 2
---|---
3| 4
5| 6

B. Bluetooth Speaker Connection

1.  Enter “Bluetooth Speaker Mode” via projector Bluetooth button.The Bluetooth name of the projector：H1_Speaker.
2.  Open your devices Bluetooth settings, search and pair the projector.
3.  You can reset Bluetooth connection via long press for 2 seconds of projector Bluetooth button

 PLACING THE PROJECTOR

The projector can be used to project onto a wall or screen, on a table. When projecting from the rear position, a special screen will be needed (not included) to display the image. Be sure to aim the remote at the sensor on the front or rear of the projector.

PROJECTION DISTANCE & SIZE

SPECIFICATION

Video Format Supported| Photo Format Supported| Audio Format Supported| Text Format Supported
---|---|---|---
.mpg/.avi/.ts/.mov/.mkv/. dat/.mp4/.vob/.flv/.3g2/. 3gp/.swf/.m4v| .bmp/.gif/.jpg/.jpeg/.pn| aac/.flac/.m4a/.mp2/. mp3/.ogg/.wav| TXT

****|

Recommended

---|---
|

NOT
Recommended

WARNINGS AND PRECAUTIONS

1. Do not look directly into the projector light.
2. Don’t touch the projector lens.
3. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
4. Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5. Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
6. Shock hazard – Please do not dismantle the projector without permission.
7.  To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
8. Objects fill with liquids, such as vases, shall not be placed on the apparatus.

TROUBLESHOOTING

1. Blurry Image
   a. Adjust focus ring or keystone.
   b. Projector and screen/wall must be in effective distance.

2. Remote Control Unresponsive
   a. Make sure remote control points at IR receiver directly.
   b. Do not cover IR receiver window.
   c. Check the battery.

3. USB/TF Unrecognized
   a. Make sure your USB stick/TF card is not over 128GB.

4. No Sound
   a. Turn off Dolby Audio in your device.
   b. If a movie’s audio number is “ac3” (Dolby Digital), then the sound may not be played (this kind of movie is very rare).

5. The projector can’t screen mirroring?
   a. Firstly, please kindly check whether the projector selects the Screen Mirroring input source and whether the device is connected to the projector WiFi.
   b. Please make sure the device and projector connect to the same WiFi if the projector features WiFi function.
   c. Please unplug the power and re-apply it again if the Screen Mirroring input source is selected and the WiFi is connected while the projector still can’t screen mirroring.
   d. Please reset the projector if it still can’t work after unplugging the power.
   e. Please feel free to contact us.

6. Fail to connect the “Bluetooth Speaker Mode”?
   a. Please open the projector “Bluetooth Speaker Mode” and device Bluetooth setting.
   b. Long press for 2 seconds of remote control or projector button to reset.
   c. Please check if the device pair with the projector successfully.
   d.If the projector still can’t work when successfully paired, please restart the projector and re-apply it again.
   e. Please feel free to contact us.

NOTICE

Without the prior written permission of Super Creativity Limited or its subsidiaries (the “Company”), no part of this Manual shall be used in any form or by any method, including copying, transmitting, translating, storing in a retrieval system or translating into any text or computer language by electronic, mechanical, optical, chemical, handwritten or any such method.

If the user or a third party suffers any damage, loss, cost or expense as a result of accident, improper use, or violation of the operating procedures of the machine, or any modification, overhaul without authorization, or replacement of the product in any form, or failure to strictly follow this Manual or the operating and maintenance manual provided by the Company during operation and maintenance, the Company shall not be held liable.

To the maximum extent permitted by law, this Manual and the Product described (including its hardware, software, firmware, etc.) are provided “as is”, which may have some defects or errors.

The Company provides no warranty of any kind, express or implied, including but not limited to merchantability, quality satisfaction, fitness for a particular purpose, nor shall it indemnify any special, incidental, accidental or consequential damages arising from the use of this Manual or the Product, including but not limited to loss of business profit, system failure, loss of data or documents.

The description and images involved in this Manual may differ from actual products, please refer to actual products. Due to product version upgrade or other needs, the Company reserves the right to update this Manual at any time.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>