sanwa 2AMSURC9 Wireless Trackball Mouse User Manual

2AMSURC9 Wireless Trackball Mouse
User Manual

GMAWTB40_Manual

https://m.facebook.com/pg/sanwago/services/?ref=page_internal

YouTube

https://m.youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg/featured?view_as=subscriber

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID:2AMSURC9
Model： SANWA RC9
2.4G Wireless Mouse Receiver

Opening

Thank you for purchasing this Wireless Trackball Mouse.

Caution

• The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
• This product is not guaranteed to be compatible with all devices.
• This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
• Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
• Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required.
• Do not use this product on airplanes as it may interfere with the airplane communication system.
• Please consult your doctor before using this product if you use a pacemaker or other medical device.

Warnings Regarding Health

Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in the hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.

Specifications

The  ID between the mouse and the receiver is fixed.
Communication
Range| Wooden desk (nonmagnetic material) / approx. radius 10m, Steel desk (magnetic material) / approx. radius 2m
Resolution| 600.800.1200.1600 DPI
Reading method| Optical sensor system
Buttons| 2 buttons, wheel button (scroll), count switch button
Size/Weight| Mouse: W107.9 x D155.1 x H6.1mm; approx.145g
Receiver: W14.7 x D19.1 x H6.1 mm; approx.2g

Compatible Models

Windows (DOS/V) PC
Apple Mac series
Chrome OS PC
*Models with a USB port (A-type connector).

Compatible OS

Windows10·8.1·8·7
macOS11、 macOS10.12～10.15
Chrome OS

Name of Parts

Check count status:
blinks 1 time: 600count/inch
blinks 2 times: 800count/inch
blinks 3 times: 1200count/inch
blinks 4 times: 1600count/inch

How to Insert Batteries

Open the battery cover and insert the AAA batteries into the battery storage slot.
Before using it for the first time, please make sure there is battery power remaining.
Be careful of polarity when inserting the battery.

Replace the battery when the movement of the mouse cursor becomes rough or when the LED sensor does not turn on.
Turn off the mouse when replacing the battery.
When replacing the batteries, please use new AAA batteries.
Leaving the expired battery in the mouse may result in leakage so be sure to remove the battery when expired.

How to Connect the Trackball

*Warning: It is recommended that other apps are closed before connecting the trackball mouse.

1. Turn on the PC and wait until OS starts up completely.
2. Connect this product to the USB port of the computer.
3. Hardware detection will start automatically and a wizard will launch to update the device driver.(installation is automatically completed for Mac products)

Customize Buttons (Windows only)

To use the button custom function, you need to install a driver from our website.

• Only Windows is available.
  [Driver installation method]

  1. Access“https://www.sanwa.com/download/tbx.exe”
  2. Click the driver installation banner on the page.
  3. Save the file.
  4. Confirm the agreement on the software specification license, click “Yes” and start the download.
  5. Follow the instructions and click “Next” and “Install”.
  6. The driver is installed. Click “Finish”.

Troubleshooting

Q.The track ball (cursor) doesnʼt move.
A.Please check if this product is correctly connected to the USB port. (See “10. How to Connect the Trackball”)
Q.The cursor or scroll movement is not smooth.
A.Remove the ball and clean it.

Warranty Term

1 year

Inquiries

support-en@sanwa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>