Banggood S500 Wireless Lavalier Microphones User Manual

Wireless Lavalier Microphones

Product Name: Wireless Lavalier Microphones

How to use a wireless lavalier microphone

1. Long press the power on button to turn it on until the blue light flashes.
2.  After the receiver is inserted into the mobile phone, the blue light flashes.
3. Automatic matching is successful after the blue light flashes slowly for 5 seconds.
4. Put the microphone hole upward and clip it at the collar of the clothes to use.
5. You wanna hear the voice of the video on the cellphone, please unplug the receiver and listen to the voice from the mobile phone, or simply plug a  3.5mm Mic into your headphone jack.
6. + / – button. 8 model to adjust the noise reduction level according to surroundings. Press + button to increase volume and decrease the noise reduction effect; Press – button to decrease volume and increase the noise reduction effect. It is better to use the 8 models in quiet surroundings and use the  4 models in noisy surroundings. Wireless lavalier microphone will remember the previous settings automatically after turning off. (Wearing 3.5mm Mic can monitor and adjust the volume)

How to charge and use a wireless lavalier microphone

1. The red indicator light on when the item is charging
2. The microphone is fully charged and the light is off

Function

1. Recording position
2. Power on/off: Long press the button to turn it on, press once the button to close/open the monitor earphone
3. Connect indicator light
4. + button: Press the button to increase volume and decrease the noise reduction effect;
5. – button: Press the button to decrease volume and increase the noise reduction effect.
6. LED light indicator of the receiver: Flash fast when not connected and flash slowly when connect successfully
7. 3.5mm jack
8. Type-C charging port

Applicable occasion

Distance real-time teaching, sports teaching, live network, video recording

Tips

1. Please purchase an adapter for iPhone
2. Few Android systems need to turn on OTG mode in advance
3. When the battery is low, the red light on and flashes
4. When the microphone is covered with windproof sponge covers, the sound quality is better
5. Keep product far away from water or fire

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>