wilfa HS1-SG ESSENTIAL Shaft Vacuum Cleaner Instruction Manual
- June 13, 2024
- Wilfa
Table of Contents
wilfa HS1-SG ESSENTIAL Shaft Vacuum Cleaner
Product Information
The INNOVAC ESSENTIAL Cordless Stick Vacuum HS1-SG is a versatile cleaning tool designed to make your cleaning tasks easier and more efficient. It features a cordless design for hassle-free cleaning and comes with various components for different cleaning needs. The vacuum cleaner has a main unit, extension tube, electric floor brush, 2-in-1 brush, crevice nozzle, power adapter, wall mount, and combo carpet brush. It also has a display that shows important information such as filter clean status, dust tank blocking, roller blocking, air flow blocking, brush blocking, speed regulation, and battery level.
Product Usage Instructions
Charging
- Hang the vacuum cleaner on the wall mount.
- Connect the power cord to the charging port.
Cleaning and Maintenance
To disassemble the dust cup:
- Hold the bottom of the dust cup.
- Press the release button and carefully pull the dust cup downward.
To install the dust cup:
- Push the dust cup up with the suction inlet facing outward.
To clean the dust bin:
- Press the dust cup release button and open the bottom cover.
- Clean the dustbin with water. Make sure it is completely dry before re-assembling.
Filter Components
To remove the filter components:
- Hold the ribs on both sides and pull upwards.
To clean the filter sponge:
- Remove the filter sponge and tap it to remove dust.
- Rinse the parts under water.
- The parts need to be completely dry before installing them back into the dust bin.
Dust Sensor To clean the dust sensor:
- Use your finger or a dry towel to remove the dust collected on the sensor.
- The sensor is located inside the tube on two sides.
Floor Brush
To remove and clean the electric floor brush:
- Press the button and remove the electric floor brush from the extension tube.
- Press and hold the button and turn the end cover upwards.
- Pull out the brush and clean it. Do not use water!
Troubleshooting
If you encounter any issues with the vacuum cleaner, refer to the following troubleshooting guide:
| Problem | Possible Reason | Solution |
|---|---|---|
| Three indicators flash | The rolling brush is tangled by hair. | Remove hair or |
any foreign object stuck in the rolling
brush.
The electric floor brush is not working| The ambient temperature for operation
is too high or too low.
Large pieces of waste have been engaged.| Use the vacuum cleaner in the proper
environment. Disassemble
the electric floor brush and remove the waste.
Operation duration becomes shorter| Battery aging| Contact customer service
The suction force is weakened| The battery is not fully charged. The filter
sponge of the dust
cup is blocked. The suction inlet of the floor brush or accessories
is blocked. The filter components are not fully dried after washing
with water.| Charge the battery. Clean the filter sponge. Remove the objects
blocking the suction inlet. Make sure the filter components are
fully dried before installing them back into the dust bin.
IMPORTANT SAFETY INSTRUCTIONS
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be done by children without supervision.
- This product is intended for indoor, non-industrial, non-commercial, household use only.
- Do not use the item outdoors or for any other purpose
- Suitable for dry locations only. Do not use it outdoors or on wet surfaces.
- Do not immerse in water.
- Do not use the hose if it is damaged.
- The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
ATTENTION – BATTERY
- Do not charge the vacuum cleaner at the ambient temperature of lower than 5°C and higher than 40°C.
- Let the vacuum cleaner cool down after use before charging.
- If the low power icon is shown on the display after turning the vacuum cleaner on, you should charge the battery.
- When the battery is fully charged, disconnect the power supply.
- If your vacuum cleaner is not used for a long time (more than 2 months), please unplug it from the power supply. In order to ensure the battery life, it needs to be fully charged once every 2 months.
- Only use the maximum power when needed. Too much usage on max will shorten the expected battery life.
ATTENTION – CLEANING AND MAINTENANCE
- To ensure the suction force of your vacuum cleaner, please clean the floor brush, brush rollers, filters, and dustbin regularly.
- Make sure that all components are installed properly, otherwise, it could cause product failure.
- Do not let water get into the electric elements of your vacuum cleaner, it could cause product failure.
PRODUCT OVERVIEW
- Main unit
- Extension tube
- Electric floor brush
- Components 4. 2- in 1 brush
- Crevice nozzle
- Power adapter
- Wall mount
- Combo carpet brush
OPERATION
- Press the power button to start.
- After switching the vacuum cleaner on, press the speed regulation button to adjust the speed. The speed will go from Auto-High-Medium-Low.
- When using the Auto level, the dust sensing function is enabled. After sensing dust, the background animation on the display will change from blue to purple. If no dust is detected, the animation remains blue, and power will run low.
- The battery time is indicated by a circle on the display, divided into 6 sections. As the battery is consumed the circle will lower section by section. When the battery is low, the display shows “Low Power”.
DISPLAY
CHARGING
- Hang the vacuum cleaner on the wall mount
- Connect the power cord to the charging port
- Charge for 4–6 hours.
CLEANING AND MAINTENANCE
DUST CUP Disassembly
- Hold the bottom of the dust cup. Press the release button and carefully pull the dust cup out downward.
Installation
- Push the dust cup up with the suction inlet facing outward.
CLEANING
- Press the Dust cup release button, and the bottom cover opens. Clean the dust bin with water. Make sure it is completely dry before re-assembling.
FILTER COMPONENTS
- Hold the ribs on both sides and pull upwards to remove the filter components.
- Remove the filter sponge, lay it with the white side down and tap it to remove dust.
- Rinse the parts under water.
- The parts needs to be completely dry before installing the filter components into the dust bin.
DUST SENSOR
- For the dust sensor to function optimally it needs to be cleaned regularly. To clean the dust sensor just use your finger and remove the dust collected on the sensor.
- The sensor is located inside the tube on two sides. Use your finger or a dry towel to wipe over the sensors.
FLOOR BRUSH
- Press the button and remove the electric floor brush from the extension tube.
- Press and hold the button and turn the end cover upwards.
- Pull out the brush and clean it. Do not use water!
TROUBLESHOOTING
| Problem | Possible reason | Solution |
|---|
Three indicators
flash
| Rolling brush is tangled by hair.
The ambient temperature for operation is too high or too low.
| Remove hair or any foreign object stuck in the rolling brush.
Use the vacuum cleaner in the proper environment.
Electric floor brush is not working| Large pieces of waste have been engaged.
The rolling brush has been tangled with hair.
| Disassemble the electric floor
brush and remove the waste.
Remove the rolling brush from the electric floor brush and remove the hair from the brush.
Operation duration becomes shorter| Battery aging
The ambient temperature for operation is too high or too low
| Contact customer service
Make sure the vacuum cleaner is not placed in the sunlight if it is too warm, and make sure doors and windows are closed if it is too cold.
| The battery is not fully charged| Charge the battery
Suction force is weakened| The filter sponge of the
dust cup is blocked
| Clean the filter sponge
| The suction inlet of the floor brush or accessories is blocked| Remove the
objects blocking the suction inlet
| The filter components are not fully dried after washing with water| Make
sure the filter components are fully dried, and assembled in the correct way
Charging failure| Ambient temperature during charging is too high or too low|
Charge the appliance at the proper temperature. Make sure the vacuum cleaner
is not placed in the sunlight if it is too warm, and make sure
doors and windows are closed if it is too cold.
---|---|---
Battery liquid leakage| The vacuum cleaner has not been used for a long time.|
Change the battery. Contact the store to replace the battery.
Error on the display| The vacuum cleaner is lacking suction power. This can be
due to something stuck inside the extension tube, filter being clogged with
dust, or that the rolling brush is tangled with hair.| Remove any object in
the extension tube, clean the filter components, and clear the rolling brush
for hair.
GUARANTEE
- Wilfa issues a 5 year guarantee on this product from the day of purchase. The guarantee covers production failure or defects that arise during the guarantee period.
- Your purchase receipt works as proof towards retailer if claiming your guarantee.
- The guarantee is valid only for products that are bought and used in private households.
- The guarantee is not valid if the product is used commercially.
- The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modified or if unauthorized reparation is done.
- Wilfa is not responsible for damage to third party parts and other collateral damage.
- The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:
- Overloading of product
- Parts which are normally worn down
- Parts you can expect being replaced regularly (e.g. filter, battery etc.)
- Wear parts like motor heads, nozzles, battery, brushes, filters, wheels, light.
- Wilfa is also not responsible for damages occurred because of excessive use, incorrect assembly, incorrect storage, incorrect charging, lack of cleaning etc.
- The battery comes with a 1 year warranty. The warranty will not be valid if the appliance has not been charged according to the manual.
Wilfa Germany GMBH Feldbergst. 27-29, 61440 Oberursel, Germany
Documents / Resources
|
wilfa HS1-SG ESSENTIAL Shaft Vacuum
Cleaner
[pdf] Instruction Manual
HS1-SG ESSENTIAL Shaft Vacuum Cleaner, HS1-SG, ESSENTIAL Shaft Vacuum Cleaner,
Shaft Vacuum Cleaner, Vacuum Cleaner, Cleaner
---|---
References
- Wilfa - Norwegian quality since 1948 – Wilfa AS
- Koti - Wilfa
- Wilfa - Norwegian quality since 1948 – Wilfa AS
- Hem - Wilfa
- Wilfa – Norsk kvalitet siden 1948