BASS JAXX SP-0109 Wireless Charging Speaker Instruction Manual

BASS JAXX SP-0109 Wireless Charging Speaker Instruction Manual

Product Overview

Package Contents

• Wireess Charging Speaker x 1pc
• Micro USB Charging Cable x 1 pc
• Instruction Manual x 1pc

Power On/Off

Power on
Side the ON/OFF switch to the “ ON” position.
Power off Side the ON/OFF switch to the “OFF” position.

Pair Wireless speaker with your mobile device

1. Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select ‘BT CHARGE SPK’ from the list shown.
4. You will hear a beep sound when pairing is successful.

Reconnect Wireless speaker to your mobile device

When powered on. the wireless speaker will automatically correct with the last successfully pawed device.

Charging your Wireless speaker

1. Use the Micro USB Charging cable provided with this wireless speaker.
2. Connect the Micro USB Charging plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
3. The light will turn red while charging and will turn off once fully charged.

NOTE:

• You must select a qualified charger from a regular manufacturer.
• You must charge the Wireless speaker if it has been not used for more than 12 months.
  

Technical Specification

• Driver Diameter: 52 m
• Impedance. 4 Ohms
• Power Supply: Li-ion Battery 3.7V 300 mAh
• Playing Time – 2 Hours
• Charging Time: 1.5 – 2 Hours
• Bluetooth Range: 32.8 Feet

Micro USB Charging Cable Included With Wireless Charging Function

FAQ

• If the Wireless speaker cannot be paired with your device. please try the following:
  Ensure that your speaker IS in pairing mode or re connection mode. Ensure that Bluetooth search function of your rioted° device is activated.

• If the Wireless speaker cannot be recharged:
  If you use a power outlet, ensure mat the power supply ts connected securely and the outlet works. If you use a computer, ensure that .t is connected and the USB port is powered.

Wireless Charging function

1. Use the Micro USB Charging cable provided with On wireless speaker.
2. Connect the Micro USB plug to Micro USS charging port on the speaker. then connect the USS plug to a USB port on a computer or wail adapter.
3. Put your wireless charging enabled devices on the front of the speaker to begin charging.
   

Safety instructions for the lithium battery and charging the product

• The input voltage to the product is DC 5V 1 – 2A.
• In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
• Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F. – Do not heat above 70 deg ‘CM 58 deg °F.
• Do not expose to sunlight or throw into fire.
• Switch off the product after use.
• Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product
• In extreme cases. abuse or misuse of Lithium battery pack can lead to explosion, heat generation, Are development or smoke development

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   • This device may not cause harmful interference.
   • This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment_

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV, technician for help.

RF warning statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

FCC ID: 2ADM5-SP-0109

Item# SP-0109-BLACK
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106

Made in China

Keep All Relevant Information for Future Reference

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>