BASS JAXX HP-0662 Ecliptic Wireless Headphones Instruction Manual

: June 3, 2024
: BASS JAXX

Table of Contents

ECLIPTIC
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ECLIPTIC

WIRELESS HEADPHONES

INSTRUCTION MANUAL

1. Introduction

Congratulations, and thank you for choosing the Ecliptic Wireless Headphones. This manual will help you operate Ecliptic Wireless Headphones. but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Ecliptic Wireless Headphones.

Safety Rules

Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones. we would strongly encourage you to read through this user manual.
Be more wary of any edges, uneven surfaces, metal parts. accessories and its packaging so as to prevent any possible injury or damage.
Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks. complete breakdown of this Bluetooth headphones, etc All are not covered under warranty.
Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
Do not use the Bluetooth headphones in a hazardous location.

2. Packaging Contents

1 X Ecliptic Wireless Headphones 1 X Micro USB Charging Cable

1 X Instruction Manual

3. Connection Diagram

Play Next/ Volume +
Play/ Pause/ On/ Off
Play Previous/ Volume –
LED Indicator
Micro-USB Charging Port (1)
Built-in Microphone

4. How to use

4.1.General Functions

Desired Result	Required Action
Turn on & Enter the pairing mode	Press and hold the On 1 Off Button for 3

seconds After turning on. the LED indicator flashes red/blue
Pairing| Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action After pairing, the LED indicator slowly blinks with blue
Turn off| Press and hold the On / Off Button for 3 seconds
Charging| Plug the Micro USB plug to the Micro USB port. When charging, the LED indicator turns red. After full charging the LED indicator turns off.
Answering a Call| Press On / Off button to answer phone call, press On / Off button again to end call. Press and hold 2 seconds to reject call. Double click to redial last call
Play / Pause Music| Press On / Off button to play music and press it again to pause music.
Play Next/ Volume +| Long press Play Next/ Volume + Button for volume up Short press Play Next/ Volume + Button for next track
Play Previous/ Volume –| Long press Play Previous/ Volume – Button for volume down. Short press Play Previous/ Volume – Button for previous track.

4.2. Pairing to Mobile phone or other device

To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.

Pairing to a phone and Entertainment:

Turn on your phone and ensure the Bluetooth function is activated.
Turn on the headphones enter the pairing mode
Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information
After a few seconds the phone will list the “BT ECLIPTIC HP” as a discover device. Select it and follow your phone’s instructions to select this pairing
Your phone will confirm the pairing. and then press Yes/OK.

4.3. Charging your headphones

For your safety. please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product. as it might damage the product.

Use the Micro USB Charging cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at (1) in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.

** Make sure to keep the headphones charging for a minimum of 2 hours before initial use.

USB Plug
Micro USB Plug

Warning:

You must select a qualified charger from a regular manufacturer
You must charge the Bluetooth headphones if it has not been used for more than 6 months.

5. Product Specification

Driver Diameter: 40 mm
Impedance. 32 Ohms
Frequency Response 20 Hz – 20 KHz
Sensitivity 100 dB +1- 3 dB
Power Supply: Li-ion Battery 3.7V 160 mAh
Playing Time: 3 – 4 Hours
Charging Time: 2 – 3 Hours
Bluetooth Range: 10 m

Micro USB Charging Cable Included

6. FAQ

1 Why is there no power even when the headphones is turned on?

Ans: Ensure the battery has been charged up to 1 hour for initial use.

2 There is no sound when playback.

Ans: Check the connection between headphones with phone or computer, if the connection is not established, please conned again. Make sure the headphones is paired and connected with your target phone or other master device

7. FCC Statement

FCC STATEMENT
1 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions
(1) This device may not cause harmful interference
(2) The device must accept any interference received including interference that may cause undesired operation
2. Changes or modifications not expressly approved by the party responsible for con-Vance could void the users authority to operate the equipment.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rubes These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications However. there 6 no guarantee that interference wit not occur n a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to Correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

RF warning statement
The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction.

Safety instructions for the lithium battery and charging the product

– The input voltage to the product is 5V 1A.
– In order to charge the product in safe manner and reliable conditions. please only adopt certified appropriate charger/ adapter for charging the product.
– Only charge the product at ambient temperatures between 10 deg ºC/ 50 deg °F and 40 deg ºC/104 deg ºF.
– Do not heat above 70 deg ºC/158 deg ºF e g Do not expose to sunlight or throw into fire
– Switch off the product after use
– Please note that we won’t take any responsibility for any wrong operation g Voltage higher than 5V) as this may result in severe injury of loss of property and we cannot control the operating process during the time the user using this product
– In extreme cases. abuse or misuse of Lithium battery pack can lead to explosion heat generation, fire development or smoke development