BASS JAXX SP-0442 Revolve LED Wireless Speaker Instruction Manual
- October 28, 2023
- BASS JAXX
Table of Contents
SP-0442 Revolve LED
Wireless Speaker
Instruction Manual
Thank you for purchasing the Revolve LED Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using.
Product Overview
Package Contents
Revolve LED Wireless Speaker x 1
Micro USB Charging Cable x 1
Instruction Manual x 1
Power On/Off
Power on Switch on the Power Button.
Power off Switch off the Power Button.
Note: Always power off the speaker when not in use.
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select ‘BT REVOLVE SPEAKER” from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile devices
When powered on, the wireless speaker will automatically connect with the last
successfully paired device.
Charging your Wireless speaker
For your safety, please always use appropriate 5V input charger/Adapter to Marge the product. DO NOT USE Quick Charging USB Adapter to charge the Product. as it might damage the Product
- Use the Mao USB cages provided with this wireless speaker.
- Connect the Moro USB plug to Micro U58 charging port on the speaker, then connect the US8 plug to a US8 port on a cortouvar or well adapter to begin charging.
- The LED Intacator we turn red while charging and will turn off once fully charged.
NOTE:
- You must select a quabfKd charger from a regular manufacturer.
- You must charge the inereless speaker If It has been not used for may than 6 months.
Technical specification
Delver Diameter 46 mm
Bluetooth Range: 32.8 Feel
Impedance: 4 Ohms
Power Supply: Charging Method: USB Charging Micro USB Cade Included
LI4on litafbmy 3.N 300 rnAh
Playtime: 1.5.2 Howe
Chaing Time: 1.5-2 Hours
Charging Light Mode: Color Changing LED Light
FAQ
• If the Wireless speaker cannot be paired with your device, please try fin following:****
– Ensure that your speaker Is Si asking mode or reconnection mode.
– Ensure that Eiluetooth search function of your mobile device is activated.
If the Wireless speaker cannot be recharged:****
– If you use a power outlet. ensure that the power supply is connected securely and the outlet melts. If you use a computer, ensure that it is connected and the VS8 pat is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is DC 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
– Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or
throw into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation. 2. Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
RF waming statement: The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.
FCC ID: 2ADM5-SP-0442
( Class 1 LED product
Keep All Relevant Information For Future Reference
ITEM# SP-0442
Made in China