BASS JAXX HP-0617 Elliptical Wireless Headphone Instruction Manual
- June 4, 2024
- BASS JAXX
Table of Contents
BASS JAXX HP-0617 Elliptical Wireless Headphone
Introduction
Congratulations, and thank you for choosing the Elliptical Wireless Headphones. This manual will help you operate the Elliptical Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Elliptical Wireless Headphones.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual.
- Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
- Do not modify, repair or dlsmanUe this Bluetooth headphones. Doing so may resutt in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty.
- Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
- Do not use the Bluetooth headphones in a hazardous location.
Packaging Contents
Connection Diagram
How to use
General Functions
| sired Result | Required Action |
|---|
Turn on &
E nt er th e pairing
mode
|
Press and hold the On I Off Button
for 3 seconds. After turning on, the LED indicator flashes red/ blue
iring
|
Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action.
After pairing, the LED indicator slowly blinks with blue
|
Press and hold the On I Off Button for3 seconds
|
Plug the Micro USB plug to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off.
An
C
| Press On I Off button to answer phone call, press On I Off button again to
end call Press and hold 2 seconds to reject call Double click to redial last
call
Pl Mu|
ess OnI Off button to play music and press it again to pause music
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a
mobile phone or other Bluetooth device. Once your Bluetooth headphones is
paired to a specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds the phone will list the ELLIPTICAL HP” as a discover device. Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing, and then press Yes/OK.
Charging your headphones
Lh For your safety, please always use an appropriate 5V input charger/Adapter
to charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product. Use the Micro USB Charging cable
accessory provided with this headphones. Connect the Micro USB plug to the
Micro USB charging port on the headphones positioned at <Din headphones
diagram on page 2. Connect the USB plug to a USB pert on a computer or wall
adapter to activate charging. Make sure to keep the headphones charging for a
minimum of 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if ii has not been used for more lhan 6 months.
Product Specification
- Driver Diameter: 40 mm
- Impedance: 32 Ohms
- Frequency Response: 20 Hz – 20 KHz
- Sensitivity: 100 dB+/- 3 dB
- Power Supply: Li-ion Battery 3.7V 160 mAh
- Playing Time: 3 – 4 Hours
- Charging Time: < 2 Hours
- Bluetooth Range: 32.8 ft
IPX4 Water-Protection
Micro USB Charging Cable Included
FAQ
-
Why is there no power even when lye headphones is timed on?
Ans: Ensure lye battery has been charged up to 1 hour for initial use. -
There is no sound when playback.
Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones Is paired and connected with your target phone or other master device.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, inducing interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
taming the equipment off and on, the user is encouraged to try to coast the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an oudist on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warming statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
- Safety instructions for the lithium battery and charging the product
- The input voltage to the product is 5V 1A.
- In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. Only charge the product at ambient temperatures between 10 degC 50 deg °F and 40 deg °C/104 deg °F Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>