BASS JAXX HP-0674 Meow LED Cat Wireless Headphone Instruction Manual
- June 4, 2024
- BASS JAXX
Table of Contents
LED LIGHT-UP CAT EARS
INSTRUCTION MANUAL
Introduction
Congratulations, and thank you for choosing the Meow Wireless Headphones. This manual will help you operate the Meow Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Meow Wireless Headphones.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety. Before using these Bluetooth headphones, we would strongly encourage you to read through this user manual.
- Be warier of any edges, uneven surfaces, metal parts, accessories, and its packaging so as to prevent any possible injury or damage.
- Do not modify, repair or dismantle these Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of these Bluetooth headphones, etc. All are not covered under warranty.
- Do not use a diluent or volatile liquid to clean the Bluetooth headphones.
- Do not use Bluetooth headphones in a hazardous location.
Packaging Contents
Includes:
1(One) Headphones 6.46in. x 8.15in. x 3.15in. (16.4cm x 20.7cm x 8cm) /
1(One) Charging Cable 9.8in. (25cm) / 1(One) Instruction Manual
How to use
4.1. General Functions
| Desired Result | Required Action |
|---|---|
| Turn on & Enter the pairing mode | Press and hold the On / Off Button for 3 |
seconds. After turning on. the LED indicator flashes ECU blue.
Pairing| Use a mobile phone with Bluetooth function or other Bluetooth devices
to perform necessary pairing action. After pairing, the LED indicator slowly
blinks blue.
Turn off| Press and hold the On / Off Button for 3 seconds.
Charging| Plug the Micro USB into the Micro USB port. When charging, the LED
indicator turns red. After full charging, the LED indicator turns off.
Answering a Call| Press the On / Off button to answer a phone call, and press
the On / Off button again to end the call. Press and hold 2 seconds to reject
the call. Double click to radial last call.
Play / Pause Music| Press On / Off button to play music and press it again to
pause music.
Cat Ear LED Light On / Off| Press the Cat LED On/Off button to turn the LED
light on and off.
Note: The LED light is only on when Bluetooth power is turned on
4.2. Pairing to Mobile phone or another device
To use your Bluetooth headphones, you must first pair your headphones with a
mobile phone or another Bluetooth device. Once your Bluetooth headphones is
paired to a specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, and enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds, the phone will list the “BT MEOW HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing, and then press Yes/OK.
4.3. Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product. Use the Micro USB charging cable
accessory provided with these headphones. Connect the Micro USB plug to the
Micro USB charging port on the headphones positioned at 1 in the headphones
diagram on page 2. Connect the USB plug to a USB port on a computer or wall
adapter to activate charging.
**Make sure to keep the headphones charging for a minimum of 2 hours before
initial use.
Warning: · You must select a qualified charger from a regular manufacturer. · You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
Driver Diameter: 40 mm
Impedance: 32 Ohms
Frequency Response: 20 Hz – 20K Hz
Sensitivity: 95 dB +/- 3 dB
Battery Capacity: Li-ion Battery 3.7 V 200 mAh
Playtime: 3-4 Hours
Charging Time: 1-2 Hours
Bluetooth Range: 32.8 Feet
Charging Method: Micro USB Charging
FAQ
-
Why is there no power even when the headphones are turned on?
Ans: Ensure the battery has been charged for up to 1 hour for initial use. -
There is no sound when playback.
Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or another master device.
FCC Statement
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet the general
RF exposure requirements. The device can be used in portable exposure
conditions without restriction.
Safety instructions for the lithium battery and charging the product
- The input voltage to the product is 5V 1A.
- In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.
- Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose yourself to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of the Lithium battery pack can lead to an explosion, heat generation, fire development, or smoke development.
Class 1 LED product
FCC ID: 2ADM5-HP-0674
Item # HP-0674 Made in China
Keep All Relevant Information For Future Reference
Approval:
Date:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>