BASS JAXX SP-0302 Clutch Wireless Speaker Instruction Manual

WIRELESS SPEAKER

Instruction Manual

Thank you for purchasing the Clutch Wireless Speaker. This manual provides more information about this wireless speaker. please read the instructions before using them.

Product Overview

Package Contents

Clutch Wireless Speaker x 1pc
Micro LtS8 Charging Cablo x tpc
Instruction Manual x 1pc

Key Operation

Power on
Long press ON/OFF button **for 2.3 seconds to U-c turn ON.
Power off
Long press ON/OFF button **for 2-3 seconds to [Ns turn OFF.
Play/ Pause
Short press ON/OFF button **once.
Volume Up
Short press + button.
Volume Down
Short press – Lytton.
Next Track
Long press • button.
Previous Track**
Long press – button

Charging your Wireless speaker

For your safety, please always use the appropriate by input charger adapter to charge the product DO NOT USE a Quick Charging USB Adapter to charge the product, as 4 might damage the product.

1. Use the Micro USB cable provided with the wireless speaker
2. Connect the Micro USB plug to Micro USE) charging port on the speaker, then connect the USB plug to a USB port on a computer or wail adapter to begin char
3. The bght will turn red while charging and will turn off once fully charged.

NOTE:

• You must select a qualified charger from a regular manufacturer.
• You must charge the Wireless speaker if it has been not used for more than 6 months

Technical specification

Drive’ Diameter. 45 mm
Impedance: 4 Ohms
Power Supply Li-ion Battery 3.711300 mAh
Playtime 1 5-2 Hours Charging Time: 1.5-2 Hours
Bluetooth Range: 32.8 Foot
Micro USB Cable Included

Pair a Wireless speaker with your mobile device

1. Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select “HT CLUTCH SPEAKER” from the list shown
4. You hear a beep sound when pairing is successful

Reconnect the Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically con with Me the last successfully paired device.

FAQ

• If the Winless speaker cannot be paired with your device, please try the following:
  Ensure rat your speaker s n paving mode or reconnection mode Ensure the rat Bluetooth search function of your mobile device is activated.

• If the Wireless speaker cannot be recharged:
  It you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.

Safety instructions for the lithium battery and charging the product
-The input voltage b the product is DC 5V 1A.
-In order to charge the product in a safe manner and in reliable conditions. please crly adopt a certified appropriate charger/ adapter for charging the product
-Only charge the product at ambient temperatures between 10 deg ‘050 deg `F and 40 deg ‘C/104 deg T.
– Do not heat above 70 deg Ti158 dog “F. eg. Do not expose to sunlight or throw into the fire -Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe,ury or loss of property. and we cannot cone the operating process dung the time the user using the orator:.
-in extreme cases. abuse or misuse of Lithium battery par* can lead to explosion and heat generation. fie development or smoke development

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received. including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: Tits equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not coax in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user ts encouraged to try to correct the interference by one or more of being following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect be equipment into an outlet on a circuit different from that to which the receiver IS Connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction,

Class 1 LED product
FCC ID: 2ADM5-SP-0302
ITEMS, SP-0302 Made in China
Keep all relevant information for future reference

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>