MONSTER MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights User Manual

June 6, 2024
Monster

MONSTER MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights -
2 MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights
User Manual
Model: MLB7-2021-RGB
V2.01121

Introduction

These car interior LED accent lights are the perfect addition to light up any automobile interior. Place them under the dash in the footwell of the driver and passengers seats for subtle illumination They require no hard wiring, just simply peel. stick. and plugin into your car’s DC adapter. Customize your color experience via the app with d minor LEO lighting strips

Features

  • Enhance your car interior with 4 – 10 5′ customizable LED strips
  • Control colors and flash modes with App
  • Self-adhesive backing for easy application
  • Powered with included 12V car DC adapter

What’s Included

  • 4 – 10 5′ RGB Color Changing LED Straps wi DC Adapter
  • Downloadable App
  •  User Manual

MONSTER MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights -
QR code

  1. Clean the surface you intend to stick the tight strip on.
  2. Peel off the backing strip off the 3M adhesive tape
  3. Press and hold the light strip firmly against the surface.
  4. Plug the DC Adapter into your can 12V DC power socket.
  5. Plug the other end of the DC adapters cord into the LED lighting Controller.
  6. To power your LED tights. with power to your vehicle’s 12V DC port’, press the red power button on the end of the DC adapter. The LED strips will illuminate.

*Note: Most vehicles must be on to supply power to its 12V outport socket.

Manual Operation

MONSTER MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights -
button

  1. Double click the multifunction button to turn the lights on and off.
  2. Single-click the multifunction button to cycle through the 8 lighting modes, including the sound reactive mode.
  3. Long press for 5 seconds to enter Bluetooth pairing mode (LEDs will flash red)

Bluetooth® Setup

In addition to using the controller, you can also use the app to control your LED lighting.
Before starting, check that your phone’s Bluetooth and data connection are turned on.

  1. To download the Monster Smart App, scan the Android or iOS (Apple) OR code below with an OR code scanning app on your mobile device, or search (Or the Monster Smart app in the Apple or Google Play store. Download the App.
    MONSTER MLB7-2021-RGB Bluetooth Sound Reactive RGB LED Car Interior Lights -
QR code

    https://play.google.com/store/apps/details?id=com.monster.smart&hl=en_US&gl=US| https://apps.apple.com/us/app/monster-smart-app/id1447483342

  2. Press the red power button on the end of DC adapter to power on your LED lights.
  3. Press the controller’s multifunction for 5 seconds until the LEDs are flashing red to indicate that the controller is in pairing mode.
  4. Open the app, follow the instructions to add your LED Lights.
  5. Customize your LED lights with color and mode options, sound reactive music mode, and set schedules for lighting effects in the app.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna. _ —Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for

Safety Instructions

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

  • Keep these instructions.
  • Do not drop, puncture, or disassemble this product.
  • Do not expose this product to dripping or splashing of drinks or liquids of any kind.
  • Avoid long exposure to direct sunlight, which may cause
  • Do not expose this product to open flames.
  • Do not use the product in a strong magnetic field.
  • Use a clean, soft cloth to clean. Do not use any corrosive cleaners/oils to clean.

Avoid distracted driving – Do not adjust the color effects or installation of this product while driving

Customer Service

1 Year Limited Warranty
Scan QR code for warranty information

https://monsterilluminessence.com/limited-warranty/

866-246-2008
[email protected]

In the event this product becomes defective, please do not return this product to your retailer.

Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty or authority to operate the equipment.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed or mobile conditions. The minimum separation distance is 20cm.

Specifications

  • LED Length: 10.5″ each
  • Voltage Supply: 12V 2A
  • App supports iOS 10.0 or higher, and Android 4.4 or higher

Need the Quick Start Guide in another language?
Scan for manual

www.monsterilluminessence.com/manuals/

The illustrated products and specifications may differ slightly from those supplied. The M Monster logo is a registered trademark of Monster, Inc. or its subsidiaries in the U.S. and other countries and is used under license. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks. Licensed and Manufactured by Jem Accessories, Inc. South Plainfield, NJ 07080. Made in China.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Monster User Manuals

Related Manuals