LOREX ACCHM2 Series WiFi Chime for 2K Wired Video Doorbell User Guide
- June 6, 2024
- Lorex
Table of Contents
LOREX ACCHM2 Series WiFi Chime for 2K Wired Video Doorbell
Wi-Fi Chime
ACCHM Series2 Quick Start Guide
lorex.com
What’s included
Installation
To attach the power plug, hook the power plug’s bottom tab into the chime slot and push in.
To detach the power plug, hold
onto the plug then push up on the detach switch.
Wi-Fi Chime overview
Status indicator
Solid blue
Operating correctly.
Flashing blue
Ready for connection. Network connection failed. Use the pin to reset.
Dimensions
Height: 3.8” (97mm)
Width: 2.0” (52mm)
App setup
- Scan the QR code on this page to download the free Lorex Home app from the App Store or Google Play Store.
- Open the Lorex Home app.
- Sign in or sign up and create an account.
- Plug the Wi-Fi Chime into a outlet.
- Once the status indicator flashes blue and the startup chime sounds, tap the + icon.
- Scan the device QR code on the chime and tap Next or tap Manually enter Device ID.
- Follow the in-app instructions to complete the setup.
Link to the 2K Video Doorbell
There are two ways to link the Wi-Fi Chime to the 2K Video Doorbell.
During the doorbell setup
When the Chime Type screen appears, select your Wi-Fi Chime, then tap
Complete.
After the doorbell setup
- Tap the icon for the 2K Video Doorbell.
- Taprbell Chime, then tap Wi-Fi Chime.
- Select your chime, then tap Save.
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Copyright © 2021 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
For up-to-date information and support, please visit:
help.lorex.com
Please see our full Terms of Service and Limited Hardware Warranty Policy at lorex.com/warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>