Maisto 82755RC 2.4GHz RC Cyklone Attack Instruction Manual
- June 6, 2024
- Maisto
Table of Contents
2.4GHZ CYCLONE ATTACK
Age 5+
#82755
Moist° Radio Control Vehicles
Please keep this owner’s instruction manual for future reference. It contains
important information. We reserve the right to Improve/revise the product
specifications without notice. Class 1 LED Product
Contents:
RC Vehicle x 1 RC Transmitter x 1 Owner’s Instruction Manual x 1
Battery Requirement:
Vehicle: 4 x 1.5V ‘AK LR6/F16 batteries. Transmitter: 2 x 1.5V “AAA” 11303/R03
batteries.
Battery installation for the Transmitter: (Refer to Diagram 1)
- Use a screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver Is not included)
- Install 2 new 1.5V “AAA” LR0311103 batteries with correct polarity (+1-) as shown inside the battery compartment.
- Install the battery cover and then tighten the screw on the battery cover.
Battery installation for the Vehicle: (Refer to Diagram 2)
- Switch the power OFF.
- Use a screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver Is not included)
- Install 4 new 1.5V “AA’ LR6/R6 batteries with correct polarity (+1-) as shown inside the battery compartment.
- Install the battery cover and then tighten the screw on the battery cover.
How to play: (Refer to Diagram 3)
- Set the “Power Switch” on the controller and vehicle to the ON position to match the frequency.
- If the frequency of the vehicle and controller does not match, switch of both the vehicle and controller, then turn them on again.
- The top LED will light up when the vehicle power is turned on.
- Push the button on the controller up or down to move the vehicle.
- Turn the switch of the controller and vehicle to the OFF position when not In play.
Performance Tips:
-
Do not drive the vehicle on grass, sand, or go through water.
-
Do not drive the vehicle In windy or rainy weather.
-
Do not drive the vehicle into any hard object.
-
Keep fingers, hair, and loose clothing away from the vehicle.
-
The operating range can be affected by a variety of factors:
a) Weak transmitter or vehicle batteries. b) Interference from other items that emit radio frequency signals such as another R/C Item on the same frequency, C8 radios, cordless phones, high voltage transformers, etc. -
Outdoor usage is recommended in order to get optimal control range.
Battery use:
- Alkaline batteries are recommended.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not mix alkaline, standard, or rechargeable batteries.
- Do not mix old and new batteries or different types of batteries.
- Non•rechargeable batteries are not to be charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Rechargeable batteries are to be removed from the product before they are charged.
- Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions.
- Remove all batteries from the product when not in use for long periods of time.
- Exhausted batteries are to be removed from the product.
- The supply terminals are not to be short-circuited.
- Dispose of batteries properly. Do not dispose of batteries in a fire — It may cause them to explode or leak causing injury or damage.
- Battery change must only be made by adults.
Cautions
- Do not attempt to disassemble the products.
- Do not operate the vehicle with the same frequency as other players in the same location. This will interfere and cause the vehicle to lose control.
- Make sure the batteries are installed with correct polarity (+1-) as shown inside the battery compartment.
- Remove the package, take out all accessories and assemble the product before giving it to children to play.
Disposal of batteries
Batteries should not be disposed of in household waste. As the consumer, you
are legally obliged to return batteries containing harmful substances and all
other used batteries. You can hand in your old batteries at public collection
points in your area or wherever batteries are sold. You will find these
chemical abbreviations along with a crossed-out refuse bin on batteries
containing harmful substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury
FCC Label Compliance Statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, Inducing interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pan 15 of me FCC Rules. These omit
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: – Reorient or relocate the receiving antenna. –
Increase the separation between the equipment and receiver. – Connect the
equipment into an outlet on a circuit different from that to which the
receiver Is connected. – Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
ASS-210 Compliance Statement: This device contains license-exempt Transmitter(s)receiver(s) that comply with Innovation, Science, and Economic Development Canada’s licence•exempl RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference; 2. This device must accept any interference: including interference that may cause undesired operation of its device.
Troubleshooting:
| Problem | Cause | Correction |
|---|---|---|
| No Function | Low battery level |
Battery polarities are reversed
The wheels are obstructed by foreign objects| Replace with new batteries
Insert the batteries with correct parties as shown on the battery compartment
Remove foreign objects on the vehicle/wheels
Drive Slow /
Poor Turning Signal| Low battery level
The wheels are obstructed by foreign objects
| Replace with new batteries
Remove foreign objects on the vehicle/wheels
Poor distance control| Low battery level
Strong interference of surroundings| Replace with new batteries
Move to a better location for playing
Maisto International, Inc., Fontana, CA 92336, U.S.A.
www.maisto.com MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>