Maisto 82410 Radio Control Vehicles Instructions

82410 Radio Control Vehicles
Instructions

Maisto Radio Control Vehicles

Please keep this owner’s instruction manual for future reference. It contains Important information. We reserve the right to improve/revise the product specifications without nonce.
CLASS 1 LED PRODUCT

|
---|---

Contents:

• Vehicle x 1
• Transmitter x 1
• Owner’s Instruction Manual x 1

Battery Requirement:

• Vehicle: 6 x 1.5V ‘AA” LR6/R6 Batteries.
• Transmitter: 2 X 1.5V ‘AAA’ LR03/R03 Batteries.

Battery installation for the Transmitter: (Refer to Diagram 1)

1. Use a screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver is not included)
2. Install 2 new 1.5V ‘AAA’ LR03/R03 batteries with correct polarity (+I-) as shown inside the battery compartment.
3. Install the battery cover and then tighten the screw on the battery cover.

Battery installation for the Vehicle: (Refer to Diagram 2)

1. Use a screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver Is not included)
2. Install 6 new 1.5V ‘AK LR6/R6 batteries with correct polarity (+1-) as shown inside the battery compartment.
3. Install the battery cover and then tighten the screw on the battery cover.

How to play: (Refer to Diagram 3, 4 & 5)

1. Set the Tower Switch’ on the controller and vehicle to ON position to match the frequency.
2. If the frequency of the vehicle and controller does not match, switch off both the vehicle and controller, then turn them on again.
3. Pull the trigger in the transmitter to drive the vehicle forward. Push the trigger in the transmitter to drive the vehicle backward.
4. Turn the steering knob on the transmitter to steer the vehicle to the right or left.
5. If the vehicle does not run in a straight line, adjust the wheel alignment under the chassis.
6. The headlights and taillights will be turned on when the vehicle is moving forward or backward.
7. Turn the switch of the controller and vehicle to the OFF position when not in play.

Performance Tips:

1. Do not drive the vehicle on grass sand or go through water.

2. Do not drive the vehicle in windy or rainy weather.

3. Do not drive the vehicle Into any hard object.

4. Keep fingers, hair, and loose clothing away from the vehicle.

5. The operating range can be affected by a variety of factors:
   a) Weak transmitter or vehicle batteries.
   b) Interference from other items that emit radio frequency signals such as another WC item on the same frequency. CB radios, cordless phones, high voltage transformers, etc.

6. Outdoor usage is recommended in order to get optimal control range.

Battery use:

1. Alkaline batteries are recommended.
2. Only batteries of the same or equivalent type as recommended are to be used.
3. Do not ma alkaline, standard or rechargeable batteries.
4. Do not mix old and new batteries or different types of batteries.
5. Non-rechargeable batteries are not to be charged.
6. Rechargeable batteries are only to be charged under adult supervision.
7. Rechargeable batteries are to be removed from the product before they are charged.
8. Be sure to insert batteries with correct polarities and always follow the battery manufacturers’ instructions.
9. Remove all batteries from the product when not in use for long periods of time.
10. Exhausted batteries are to be removed from the product.
11. The supply terminals are not to be short-circuited.
12. Dispose of batteries properly. Do not &pose of batteries in a fire – it may cause them to explode or leak causing injury or damage.
13. Battery change must only be made by adults.

Cautions

1. Do not attempt to disassemble the products.
2. Make sure the batteries are installed with correct polarity (+/-) as shown inside the battery compartment
3. Remove the package, take out all accessories and assemble the product before giving it to children to play.

FCC Label Compliance Statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions :

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the ‘mils for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Troubleshooting:

Battery polarities are reversed
The wheels are obstructed by foreign objects| Replace with new batteries
insert the batteries wit correct updates as shown in the battery compartment Remove foreign objects on the yeti*/ wheels
Drive Slow!
Poor Turning Signal| Low battery level
The wheels are obstructed by foreign objects| Replace with new batteries
Remove brelan objects on the vehicle/wheels
Poor &stance control| Low battery level
Strong interference of surroundings| Replace with new batteries
Move to better bacon for playing

Disposal of batteries
Batteries should not be disposed of in household waste. As the consumer, you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold. You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury
Warranty
All Maisto R/C products have 30 days limited warranty in function and performance. You may receive a new replacement product if the defective product is returned to Maisto freight prepaid and confirmed a factory defective. Maisto’s 30 days warranty is limited to factory defects in material and workmanship only. The warranty does not cover unauthorized modification, accidents, abusive use, and consequential damages per our judgment. The warranty is limited to the original purchaser with dated proof of purchase only. If you have a problem with our product. e-mail or call customer service first, RA. may be issued if the problem cannot be resolved over the phone or email. Return for repair or replacement must be shipped prepaid/postage prepaid and insured, including dated proof of purchase. RAN and brief description of the problem. If the product is returned without a dated proof of purchase. it will be excluded from the coverage of this warranty. Allow 3 to 5 weeks for delivery of repaired or replacement per Maisto’s discretion. Delivery is limited in the U.S.A. or Canada only. Warranty is only valid for purchases in U.S.A and Canada only. Check the FAQ section before you return the product to Maisto.
FAQ (Frequently Asked Questions)
1) Why does my Ft/C Vehicle not start?
Make sure the frequency of the vehicle and transmitter are matched.
Check to make sure the batteries are not drained.
Make sure the batteries are installed per polarity indicators.
Make sure all the wheels are not obstructed by any foreign objects.
2) Why does my FIX Vehicle make unusual noises?
Check to make sure the batteries are not drained.
Check to make sure all the wheels are not obstructed by any foreign objects.
3) What if I’m still having a problem?
Check the FAQ and make sure all attempts have been made to make the unit work.
Check your purchase receipt date and make sure it’s within the 30 days warranty period at the time you intend to send it back. Contact Maisto (see below), and tell us the model that you have, the problem(s) you are having. your daytime phone number, and any other information that might be helpful for us to resolve the problem If Maisto carrot solve your problem by mail. email or telephone, we will issue a return authorization number so you can return the unit to us for repair or replacement. No returns will be accepted without a return authorization (RA) number issued by Maisto clearly marked on the outside of the package. Pack the unit back in its original box or another box with sufficient protective material, include a copy of your dated store receipt and a description of the problem then send it to freight prepaid to the address which we will provide when we issue the RA number.
4) Rosso rotor to FAQ section on our Webelo for more Information.
Website: www.maisto.com
Email: [email protected]
Phone: 909-357-7988 8:30 am. – 5D0 p.m. / Monday-Friday / Pacific Tyne
Maisto International, Inc.,
Fontana, CA 92336, U.S.A.

MAY CHEONG TOY PRODUCTS FTY. LTD
DIECUT Jona: Q0366_21-Ins Eng…………
ROSS by LCC DEE 25/08/2021…………..
Test No.: bai…………….
No-: ISIIVISISMIIRC…………….
Material:…………..
MIN……………..
Nat…………….

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>