BASS JAXX HP-0489 Connect Wireless Headset Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
CONNECT WIRELESS HEADSET
INSTRUCTION MANUAL
Introduction
Congratulations, and thank you for choosing the Connect Wireless Headset. This manual will help you operate the Connect Wireless Headset, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Connect Wireless Headset.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headset, we would strongly encourage you to read through this user manual.
- Be warier of any edges, uneven surfaces, metal parts, accessories, and packaging so as to prevent any possible injury or damage.
- Do not modify, repair or dismantle this Bluetooth headset. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headset, etc. All are not covered under warranty.
- Do not use a diluent or volatile liquid to clean the Bluetooth headset.
- Do not use the Bluetooth headset in a hazardous location.
Packaging Contents
Connection
How to use
General Function
Desired Result|
Required Action
---|---
Turn on & Enter the pairing mode| Press and hold the On / Off Button for 3
seconds. After turning on, the LED indicator flashes red/blue.
Pairing| Use a mobile phone with Bluetooth function or other Bluetooth devices
to perform necessary pairing action. After pairing, the LED indicator blinks
with blue.
Turn off| Press and hold the On / Off Button for 3 seconds.
Charging| Plug the Micro USB into the Micro USB port. When charging, the LED
indicator turns red. After full charging, the LED indicator turns off.
Answering a Call| Press the On / Off button to answer a phone call, press the
On / Off button again to end the call. Press and hold for 2 seconds to reject
the call. Double click to redial the last call
Play/Pause Music| Press the On/Off button to play music and press it again to
pause music.
Pairing to Mobile phone or another device
To use your Bluetooth headset, you must first pair your headset with a
mobile phone or another Bluetooth device. Once your Bluetooth headset is
paired to a specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headset, enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more
- After a few seconds, the phone will list the “BT CONNECT HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing and then press Yes/OK.
Charging your headset
For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.
Use the Micro USB cable accessory provided with this headset. Connect the Micro USB plug to the Micro USB charging port on the headset positioned at 1 in the headset diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
**Make sure to keep the headset charging for a minimum of 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer
- You must charge the Bluetooth headset if it has not been used for more than 6 months
Product Specification
Driver Diameter: 40 mm Impedance: 32 Ohms
Frequency Response: 20 Hz – 20 kHz
Sensitivity: 100 dB +/- 3 dB
Power Supply: Li-ion Battery 3.7V 160 mAh
Playing Time: 3 – 4 Hours
Charging Time: 2 Hours Bluetooth Range: 32.8 Feet
Micro USB Charging Cable Included
FAQ
-
Why is there no power even when the headset is turned on ?
Ans: Ensure the battery has been charged up to 1 hour for initial use. -
There is no sound when playback.
Ans: Check the connection between headset with phone or computer, if the connection is not established, please connect again. Make sure the headset is paired and connected with your target phone or another master device.
FCC Statement
FCC STATEMENT
-
This device cants with Pat 15 of the FCC Rules. Operation is sir text to the fabling two corollas:
1. This device may not cause harmful interference.
2. This device must accept any interference received, inducing interference that may cause undesired operant -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the lint for a Class B digital device, pausal to Pat 15 et the FCC Riles. These fat are designed to provide reasonable protection against harmful interference it a residential installation. This equipment generates uses and can radiate radio frequency energy and, f not instated and used in accordance %fah the instructions may cause harmful interference to ratio carnification. However, there is no guarantee that interference will not occur in a particular installation. If this &Moment does cause harmful interference to radio or television reception, With can be determined by timing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient a rebate for the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an °Wet on an acute afferent from that to which the receiver is connected.
- Casult the dealer or an experienced radiofTV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirements The
device can be used in portable exposure conditions without restriction.
Safely instructions for the lithium battery and charging the product
- The input voltage to the product is 5V 1A,
- In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product. -Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire.
- Switch off the product after we.
- Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we can control the operating process cluing the time the user using this product.
- In extreme cases, abuse or misuse of the Lithium battery pack can lead to an explosion, heat generation, We development
FCC ID: 2ADM5-HP-0489
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Keep all relevant information for future reference
Item HP-0489
Documents / Resources
| BASS
JAXX HP-0489 Connect Wireless
Headset
[pdf] Instruction Manual
HP-0489, HP0489, 2ADM5-HP-0489, 2ADM5HP0489, HP-0489 Connect Wireless Headset,
Connect Wireless Headset
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>