QUIKCELL LWS17 Mono Wireless Headset User Guide

June 6, 2024
QUIKCELL

QUIKCELL LWS17 Mono Wireless Headset User Guide
QUIKCELL LWS17 Mono Wireless Headset

What’s Inside

What's Inside

  1. Mono Wireless Headset
  2. Micro-USB Charging Cable

Headest Controls

  1. MFB Button
    Headest Controls
    Short Press = play/pause music & answer/end phone calls
    Long Press (2 seconds) = power on & ignore/decline phone calls & use voice assistant
    Long Press (5 seconds) = power off
    Double Press a re-dial the last number called

  2. Volume Button
    Short Press Up = increase volume
    Long Press Up = skip to next song
    Short Press Down = decrease volume
    Long Press Down = skip to previous song
    Headest Controls

  3. Microphone

  4. LED Indicator Light

  5. Micro-USB Charging Port

  6. Speaker

  7. Gel Ear-Tip
    Headest Controls

CHARGE HEADSET

Plug Micro-USB into headset and USB into a compatible port (such as a wall charger, car charger, or computer). Light is RED while charging and LED light is off when fully charged.

Wall/Car charger not included

PAIRING YOUR DEVICE

On the top of your Mono Wireless Headset, press and hold the Multi-Function button until you see the LED indicator flashing between RED and BLUE and hear “Power On.” In your devices Bluetooth settings look for “MONO-BLK” to appear as an option and select to complete pairing. When it is connected you will hear “Connected” play through your headset and the LED light will turn off.

START LISTENING

When you’re ready to use, press and hold the MultiFunction button for 2 seconds to turn your Mono Wireless Headset on.

The Multi-Function button can also be used to play/ pause music, answer, end, decline, and re-dial phone calls, use voice assistant, and power off the headset.

Use the volume button on the side of the headset to adjust volume and skip songs.

See how to use button controls.

SPECIFICATIONS

Bluetooth: V 5.1
Weight: .0.016Ib
Frequency: 2.402-2.480GHz
Charging Voltage: 5V
Charging Time:1.5H
Power-off Voltage: 3.2V
Talk Time: 5H
Play Time: 5H
Standby Time:120H
Size: (L) 2.36in x (N) 0.63in x (-1)0.86in

ONE YEAR LIMITED WARRANTY

visit quikcell.com/warranty

© 2021 All rights reserved. Alphacomm and Quikcell are registered trademarks of Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective owners. Designed by Alpha Comm Enterprises, LLC at 1500 Lakes Parkway, Lawrenceville, GA.30043.


Mono Wireless Headset

MONO-BLK
FCC ID: 2AKZ8-LWS17
Alpha Comm Enterprises Inc., LLC
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordnce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals