QUIKCELL OnBeatMax Portable Wireless Speaker User Guide

QUIKCELL OnBeatMax Portable Wireless Speaker

SPECIFICATIONS

• Driver Size: Two 52mm Dynamic Drivers
• Bluetooth Version: 5.0
• Speaker Materials: ABS/iron net/Silicone
• Weight: 25oz
• Battery Type: Lithium Ion
• Speaker Power: 1 OW x 2
• Charging Time (hours from empty): 4.5-5hrs
• Music Playtime (volume at 50%): 24hrs
• Talk Time (volume at 50%): 24hrs
• Frequency Response: 40Hz-20KHz
• Water resistant: IP67
• Wireless Connection Range: 33ft

WHAT’S INSIDE

1. Wireless Speaker
2. Built-in Carrying Strap
3. USB-C Charging Cable
4. AUX Cable
5. Carabiner Clip

HEADPHONE CONTROLS

1. Power Button
   • Long Press = power off/on
2. [+] Button
   • Long Press = skip to the next song
   • Short Press = increase volume
3. [-] Button
   • Long Press = Skip to the previous song
   • Short Press = decrease volume
4. [Play, Pause, Answer] Button
   • Short Press = play/pause music & answer/end phone calls
   • Long Press = pair to another smartphone, ignore/decline phone calls
   • Double Press = redial last dialed number
5. TWS Pairing Button
   • Short Press = enter TWS pairing mode
   • Double Press = exit TWS pairing mode
   • Long Press (6 seconds) = clear device pairing history
6. Microphone
7. LED indicator light
8. USB-C charging port
9. Reset Button
10. AUX port

CHARGING YOUR SPEAKER

Plug the USB-C tip of your charging cable into your speaker and the USB-A tip into a compatible port (such as a wall charger, car charger, or computer). Light is RED while charging and turns off when fully charged. Allow your speaker to fully charge for 4.5-5 hours prior to first use.

Use the included USB charging cable to connect your OnBeat Max to a compatible charging port.

• USB charger not included. Requires at least a 5V/2A charger.

PAIRING YOUR DEVICE

When you turn on your OnBeat Max for the first time, it will automatically enter pairing mode. You will see the BLUE indicator light flashing and can then search for “OnBeat Max” in your devices Bluetooth settings. When your device is paired you will hear a connection tone.

If you would like to pair another device to your OnBeat Max, you can do so a couple different ways.

Option 1:
Turn off the Bluetooth for the device that is already connected. You will then hear a tone to know it has been disconnected and see the BLUE indicator light flashing. You can now search for “OnBeat Max” in your other devices settings to connect.

Option 2:
Long press the PLAY /PAUSE Button for 3 seconds until you hear the connection tone and see the BLUE indicator light flashing. You can now search for “OnBeat Max” in your other devices settings to connect.

BLAST THE SOUND

• Use the POWER BUTTON to turn your OnBeat Max ON/OFF.
• Use the + and – buttons to adjust the volume and skip songs.
• Use the PLAY/PAUSE button to control music and answer, end, or decline phone calls. Long press the PLAY/PAUSE button for 3 seconds to connect to another phone.
  • Your OnBeat Max will turn off after 5 minutes if a device is not connected, your device is out of range, or your 8/uetooth is turned off

PAIRING WITH ANOTHER ONBEAT MAX

To use the OnBeat Max’s TWS setting, you will need to ensure the other OnBeat Max is within range and that neither speaker is connected to a smartphone, then short press the TWS Button on each speaker to begin pairing. When you see the indicator light flashing BLUE, followed by the connection tone your speakers are paired, and you may now pair them with your phone by selecting “OnBeat Max” in your Bluetooth settings.

• When speakers are in 7WS mode, all functions are linked. Meaning, you only need to use controls on one of the speakers to control both.

HOW MUCH POWER DO I HAVE

You can check the battery percentage on your smartphone by doing the following:

Apple iOS 14 and up:
From your home screen, swipe left to go to your “Today View”. From here long press any existing widget and select “Edit Home Screen” to go into jiggle mode. Then, look for the + in the top left corner to search for the battery widget. You can then choose the size widget that works for you – small, medium, or large. This will now show you the battery level of all connected devices.

Android Oreo (8.1) and up: In Settings go to “Connections” Tap on the word “Bluetooth” (not the switch next to it) and you will see complete list of all connected devices and their battery level.

Apple

Android

Additionally, when your OnBeat Max reaches 20% power, you will hear “Battery Low” every 2 minutes. If it reaches 5% power, it will turn off automatically.

ONE-YEAR LIMITED WARRANTY

For warranty information, please visit quikcell.com/warranty.

2021 rights reserved. Alpha Comm and Quikcell are registered trademarks of Alpha Comm Enterprises. AR’s other trademarks are the property of their respective owners. Designed by Alpha Comm Enterprises at 1500 Lakes Parkway; Lawrenceville, GA 30043.

OnBeat Max
ONBEATMAX
FCC ID: 2AEZG-0261
Alpha Comm Enterprises Inc.
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause ham,ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>