QUIKCELL DRIVE DOCK Wireless Charging Car Mount User Manual
- June 4, 2024
- QUIKCELL
Table of Contents
QUIKCELL DRIVE DOCK Wireless Charging Car Mount
SPECIFICATIONS
- Input: 5V/2A, 9V/2A, 12V/2A
- Wireless Output: 15W (Max)
- Wireless Protocols: Most current WPC Qi 1.2.4 EPP+PPDE
- Maximum Weight Limit: 1 kg
- Extendable Arm Maximum Length: 4.5 in.
- Adjustable Grips Maximum Width: 4 in.
WHAT’S INSIDE
- Charging Base
- Vent Clip
- Dash Suction Mount
- 4 ft USB-A to USB-C
DRIVE DOCK CHARGE BUTTONS & CONTROLS
- Quick Release Button
- Adjustable Grips
- Adjustable Base
- Extendable Arm
- Adjustment Knobs
- Suction Lock
- Adjustable Vent Clip Grip Button
- Vent Clip Support Kickstand
MOUNTING POSITIONS
- Vent
- Dash
- Window
STEP 1
PLACE IN BASE
Press your quick release button to extend your adjustable grips out fully. Then place your device in your base and squeeze grips together to tighten around your device to hold it securely in place. If you need to adjust the base for your device’s height, you can pull the adjustable base down to the height you need.
STEP 2
3 MOUNTING OPTIONS
With three convenient ways to mount, you can pick the one that works best for you.
Vent:
Screw your phone base into your vent clip. Use the adjustment knobs to tighten
the vent clip to your phone base. Using the adjustable vent clip grip button,
open the grips out completely, insert your vent clip into the slots of your
car’s vent, and close the vent clip grips again using the button. Position the
vent clip’s kickstand on the base of your vent for added stability and support
.
Dash/Window:
Screw your phone base into your dash/window mount using the adjustment knobs.
Make sure your suction lock is pulled up. Remove plastic film from the suction
cup base and wipe down the area you will be mounting your DriveDock Charge.
Place the mount where you’d like it to sit on your dash. Push the suction
lockdown and your mount should now be secured in place.
STEP 3
ROTATE. EXTEND. FLIP.
Use the 360° rotation to adjust your DriveDock Charge’s angle. You can use this to turn your device to portrait, vertical, or anywhere in between using your adjustment knobs. Extend the arm of your mount to reach up to 4.5 inches tall for convenience when needed. Hold various devices using your device grips that extend up to 4 inches wide.
STEP 4
CHARGE UP!
Using the included charging cable, plug the USB Type-C connector into your DriveDock Charge and connect the USB-A connector to a compatible port (such as a car charger).
USB car charger is not included and will be required in order to supply power to your Drive Dock Charge.
QUIKCELL
Full user manual included for more detailed instructions.
ALPHACOMM
2021 All rights reserved. AlphaCom and Quikcell are registered trademarks
of Alpha Comm Enterprises, LLC. All other trademarks are the property of their
respective owners. Designed by Alpha Comm Enterprises, LLC at 1500 Lakes
Parkway; Lawrenceville, GA 30043. Diseñado por Alpha Comm Enterprises, LLC en
1500 Lakes Parkway, Lawrenceville, GA.30043.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>